Datasheet

BYD COMPANY LIMITED
Yan An Road, KuiChong, Longgang, Shenzhen, China
Tel ：[phone](12 lines) Fax ：[phone]
http://www.byd.com.cn
3
7. Ingredients EXPOSURE LIMITS QUANTITY
8. PHYSICAL PROPERTIES
9. SPILL MANAGEMENT PROCEDURES
10. DISPOSAL INFORMATION
11. PRECAUTIONS AND COMMENTS
12. Storage Information
Rare metal(Hydrogen absorbed alloy) ≈14.5%
Nickel (as Nickel,
Nickel Hydroxide, ≈44.0%
and Nickel Oxide)
K
+
≈1.3%
Cobalt Hydroxide(as Cobalt Metal) ≈6.7%
Manganese ≈2.4%
Aluminum ≈1.5%
Hydroxyl, Liquid ≈1.4%
Nylon&PP ≈4.2%
Iron(steel shell, Cap, NE base, etc) ≈19.4%
Additive ≈4.6%
Boiling Point: Not applicable Melting pointing: Not applicable
Vapor Pressure: Not applicable Vapor Density: Not applicable
Specific Gravity: 1.17-1.250(electrolyte) Evaporation Rate: Not determined
Solubility in water: Electrolyte solution is completely soluble
REMAINDER: INSOLUBLE
Electrolyte Spill: Flush with water and neutralize with dilute vitriol.
The storage battery is a hazardous waste under RCRA. It may be returned to BYD for
recycling.
Battery is TCLP Toxic. Battery and electrolyte solution are corrosive. If not recycled,
must be disposed of in accordance with all international, national, provincial
These cells and batteries manufactured from them may be highly charged and are
capable of high-energy discharge. Care should be taken to handle cells properly to
avoid shorting or misuse that will result in rapid uncontrolled electrical, chemical, or
heat energy release.
Do not short circuit---may cause burns.
Do not break open cell.
These cells and batteries shall not be stored in high temperature, the maximum
temperature is 60℃(less than one month), otherwise the cells and batteries maybe
leakage. Besides, the cells and batteries shall be protected from short circuit and
protected from movement that could result in short circuit.