Datasheet

ManualsBrandsFluke ManualsMiscellaneous Test AccessoriesNiMH battery pack for Fluke series 190 - 199C, 196C, 199B, 196B & 192B Series ScopeMeter

ScopeMeter 190 Series:

Speed, performance and analysis power

For demanding applications, the ScopeMeter 190C

and 190B Series high-performance oscilloscopes

offer specifications usually found on top-end bench

instruments. They’re ideal for engineers who need

the full capabilities of a high-performance scope in a

handheld, battery powered instrument.

Dual input - 200, 100 or 60 MHz bandwidth

Up to 2.5 GS/s real-time sampling per input

Choice between a high resolution Color (190C) or

Black and White (190B) display

High waveform resolution of 3000 datapoints

per channel

Digital Persistence for analyzing complex dynamic

waveforms like on an analog scope (190C Series)

Fast display update rate for seeing dynamic

behavior instantaneously

Connect-and-View™ automatic triggering, a full

Range of manual trigger modes plus external

triggering

Frequency Spectrum using FFT analysis (190C)

27,500 points per input record length using

ScopeRecord™ mode

Automatic capture and replay of 100 screens

Four hours rechargeable NiMH battery pack

1,000V CAT II and 600V CAT III safety certified

Up to 1,000V independently floating isolated

inputs

Technical Data

ScopeMeter 120 Series:

Three-in-one simplicity

The compact ScopeMeter 120 Series is the rugged

solution for industrial troubleshooting and installation

applications. It’s a truly integrated test tool, with

oscilloscope, multimeter and “paperless” recorder in

one affordable, easy-to-use instrument. Find fast

answers to problems in machinery, instrumentation,

control and power systems.

A dual input 40 MHz or 20 MHz digital

oscilloscope

Two 5,000 counts true-rms digital multimeters

Cursor measurements (Fluke 124)

A dual input TrendPlot™ recorder

Connect-and-View™ trigger simplicity for hands-

off operation

Shielded test leads for oscilloscope, resistance,

continuity and capacitance measurements

Up to seven hours battery operation

600V CAT III safety certified

Optically isolated RS-232 interface

Rugged, compact case

✓



ISO 9001

ScopeMeter

190 Series

and ScopeMeter

120 Series

Now enhanced with 3K memory

and FFT Spectrum Analysis

Summary of content (8 pages)

PAGE 1
No w an en d ha FF n T ce Sp d ec wit tru h m 3K An m al em ys or is y ScopeMeter® 190 Series YM IT ANAGEMENT Technical Data SY S  M TE QU AL and ScopeMeter® 120 Series CE R TI 00 1 ISO 9001 FI E O D T O EET IS M 9 R ScopeMeter 190 Series: Speed, performance and analysis power ScopeMeter 120 Series: Three-in-one simplicity For demanding applications, the ScopeMeter 190C and 190B Series high-performance oscilloscopes offer specifications usually found on top-end bench instruments.
PAGE 2
Technical Specifications 190C and 190B Series OSCILLOSCOPE MODE Time delay VERTICAL DEFLECTION Bandwidth Rise time Bandwidth limiter Number of inputs Input coupling Input sensitivity Normal/Invert Variable Attenuator Input voltage Vertical resolution Accuracy Input impedance Fluke 199C Fluke 199B 200 MHz 1.7 ns Fluke 196C, Fluke 196B 100 MHz 3.5 ns Fluke 192B 60 MHz 5.8 ns User selectable: 10 kHz, 20 MHz or off 2 plus external trigger. All inputs isolated from each other and ground.
PAGE 3
METER MODE RECORDER MODE Via 4 mm banana inputs. Fully isolated from scope inputs and scope ground. The specified accuracy is valid over the temperature range 18 °C to 28 °C (65 °F to 82 °F). Add 10 % of specified accuracy for each degree C below 18 °C or above 28 °C. SCOPE-RECORDROLL MODE Source and display Memory depth MAXIMUM RESOLUTION VOLTMETER RANGES ACCURACY Vdc Vac true rms 15 Hz...60 Hz: 60 Hz...1 kHz: Vac+dc true rms dc...60 Hz: 60 Hz...
PAGE 4
GENERAL SPECIFICATIONS INPUT VOLTAGE RATINGS Maximum probe voltage 1,000V CAT II, 600V CAT III SAFETY Compliance (Maximum voltage between 10:1 probe tip (VPS200) and reference lead) Floating voltage 1,000V CAT II, 600V CAT III (Maximum voltage between earth ground and any terminal (signal input or shielding)) Independently isolated inputs1,000V CAT II, 600V CAT III (Maximum voltage between any terminal of one input or probe (VPS200) and any other terminal of another input or probe (VPS200)) Maximum vo
PAGE 5
Technical Specifications ScopeMeter 120 Series OSCILLOSCOPE MODE VERTICAL DEFLECTION Bandwidth and risetime Fluke 124 Fluke 123 • with VPS40 probes 40 MHz 20 MHz • input A and B directly 40 MHz 20 MHz • with STL120 Shielded Test Leads 12.5 MHz 12.5 MHz Instrument risetime (input directly) 8.75 ns 17.5 ns Number of inputs 2 Input coupling AC, DC with ground level indicator Input sensitivity 5 mV ...
PAGE 6
RECORDER MODE TRENDPLOT™ RECORDING Source and display Range Recorded timespan Recording mode Measurement speed Horizontal scale Dual input electronic paperless chart recorder. Plots and displays the actual, minimum, maximum and average of any measurement. Input A, Input A and B 15 s/div till 2 days per division (automatic) Up to 16 days with a resolution of 1.5 hours Continuous with automatic vertical scaling and horizontal time compression 2.
PAGE 7
FlukeView® ScopeMeter® Software FlukeView ScopeMeter software helps you get more out of your ScopeMeter: • Store instrument’s screen copies on the PC, in color (with Fluke 190C-Series only) or in black&white • Copy screen images into your reports and documentation • Capture and store waveform data from your ScopeMeter on your PC • Create and archive waveform references for automatic (Fluke 190C Series) or visual (Fluke 190B and 190C Series) comparison • Includes waveform analysis, e.g.
PAGE 8
Selection Table Bandwidth Max. real time sample rate Max. equivalent time sample rate Display Digital Persistence Envelope mode Waveform Compare Color ScopeMeter 190C Series Fluke 199C Fluke 196C 200 MHz 100 MHz 2.