Manualshelf

Datasheet

ManualsBrandsFluke ManualsMiscellaneous Test AccessoriesLi-Ion battery pack - Fluke 190-062, Fluke 190-062/S, Fluke 190-102, Fluke 190-102/S, Fluke 190-104, Fluke 190-104/S, Fluke 190-202, Fluke 190-202/S, Fluke 190-204, Fluke 190-204/S
12345
3210-PR-TF English Instruction Sheet
Page 4
Instructions
To use the BP290 with a 190 Series II ScopeMeter or 430-II Power
Quality Analyzer:
1. Carefully check for proper positioning of the support plate before
you remove the protective layer from the self-adhesive side of the
support plate. See A in figure.
2. Install the support plate on the battery pack B.
3. Place the battery with the support plate into the groove of the battery
compartment. Press firmly to make sure the battery is placed
correctly C.
The BP291 does not need any modification before you install the battery
pack into the test tool.
The battery pack has an indicator with four LEDs (25 %, 50 %, 75 %, and
100 % charge) and a test button.
To check the battery charge:
1. Push T. The LEDs light to show the battery charge level.
If all four LEDs are on, the battery charge is at 100 % of capacity.