User Manual

EI-162BN
Users Manual
4
Accessories
The following accessories are shipped with your Transformer:
• Two fasteners for holding Transformer halves together
• One cable bobbin with two 12-meter (40-foot) test leads for
connecting the Transformer to the Tester’s jack. The female red and
blue leads then plug onto the male red and blue banana plugs on the
sensing cable adapter used with the Fluke 1623 and 1625 for selective
resistance measurements. (Sensing cable adapter, Fluke part number
2539195).
• One contact clamp for establishing an earth ground electrode
connection point on the transmission line pylon. The clamp features a
fastener that secures the clamp to the pylon’s frame. The clamp also
has a 4-mm bore hole that fits a standard banana plug, with a
tightening screw for securing the plug.
• One carrying case
• Users manual