Datasheet
6 Fluke Corporation Fluke Connect™ Modules
Fluke v3001 FC Wireless DC Voltage Module
A fully functional dc voltage meter that wirelessly relays dc voltage measurements
to other Fluke Connect™ enabled master units, listed below.
• Fluke 3000 FC DMM
• Fluke Ti200/300/400 Infrared Camera
• PC via optional pc3000 FC Adapter
• Fluke Connect Mobile app
v3001 FC main features include:
• Measure up to 1000 V dc
• Use as a standalone meter or as part of the system
• Logging function for recording and saving up to 65,000 readings
• TL222 Test Leads
• AC220 Alligator Clips
• Magnetic hanging strap
v3001 FC general specifications
LCD w/backlight 3 ½ digits, 6000 counts, 4/sec update rate
Battery type 2 AA Alkaline batteries, NEDA 15A, IEC LR6
Log rate/Interval Adjustable by PC from 1 sec to 1 hr, default 1 min
Battery life 400 hours minimum
Memory Record up to 65,000 readings
RF communications 2.4 GHz ISM Band
RF communication range Open air, unobstructed: Up to 20 m
Obstructed, sheetrock wall: Up to 6.5 m
Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m
Operating temperature -10 °C to +50 °C
Storage temperature -40 °C to +60 °C
Temperature coefficient 0.1 X (specified accuracy)/°C (< 18 °C or > 28 °C)
Relative humidity 0 % to 90 % (0 °C to 35 °C), 0 % to 75 % (35 °C to 40 °C),
0 % to 45 % (40 °C to 50 °C)
EMC IEC 61236-1, Portable
Safety Compliance IEC 61010-1, 600 V CAT IV / 1000 V CAT III, 3rd edition
Pollution Degree 2
Certifications CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
Ingress Protection (IP) rating IP42
Size (HxWxD) 160 mm x 66 mm x 38 mm (6.3 in x 2.6 in x 1.5 in)
Weight 0.255 kg (9 oz)
DC voltage
Function Range Resolution Accuracy
mV dc 600.0 mV 0.1 mV 0.09 % + 3
V dc 6.000 V 0.001 V 0.09 % + 3
60.00 V 0.01 V
600.0 V 0.1 V
1000 V 1 V 0.15% + 2
Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with rela-
tive humidity at 0 % to 90 %. Accuracy specifications take the form of ±([ % of Reading ] + [ Number of
least significant digits ]).All ranges are autoranging. Accuracy is specified from the range obtained by
autoranging, from 18 °C to 28 °C.
(Not compatible with Fluke CNX test tools)