Datasheet
a3001 FC general specifications
Fluke a3001 FC Wireless iFlex AC
Current Module
A true-rms current clamp meter that wirelessly relays
measurements to other Fluke Connect™ enabled mas-
ter units, listed below.
• Fluke 3000 FC DMM
• Fluke Ti200/300/400 Infrared Camera
• PC via optional pc3000 FC Adapter
• Fluke Connect Mobile app
The iFlex™ Wireless Current Module allows you to
measure around awkward sized conductors or get into
tight spaces and makes wire access easier.
• Contains: One true-rms flexible current meter and
one iFlex i2500-10 Flexible Current Probe
• Measure up to 2500 A ac
• Use as a standalone meter or as part of the system
• Logging function for recording and saving up to
65,000 readings
• Inrush function
• Magnetic hanging strap
Range 0.5 A to 2500 A AC
Resolution 0.1 A
Accuracy 3% ± 5 digits (5 Hz to 500 Hz)
Crest factor (50Hz/60Hz) 3.0 at 1100A, 2.5 at 1400A, 1.42 at 2500A, add 2% for C.F. > 2
LCD w/backlight 3½ digits
Log rate/interval 1 sec minimum/adjustable by PC or front panel
Battery type 2 AA, NEDA 15A, IEC LR6
Battery life 400 hours
Memory Record up to 65,000 readings
RF communications 2.4 GHZ ISM Band
RF communication range Open air, unobstructed: Up to 20 m
Obstructed, sheetrock wall: Up to 6.5 m
Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m
Operating temperature -10°C to +50°C
Storage temperature -40°C to +60°C
Temperature coefficient Add 0.1X (specified accuracy)/ °C (<18°C or >28°C)
Operating humidity 90% at 35°C, 75% at 40°C, 45% at 50°C
Altitude Operating: 2,000 m
Storage: 12,000 m
EMC EN 61326-1:2006
Safety compliance IEC 61010-1, 600 V CAT IV/1000 V CAT III, 3rd edition Pollution
Degree 2
Safety rating CAT IV 600 V, CAT III 1000 V
Certifications CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
Ingress Protection (IP) rating IP42
Pollution degree 2
Jaw opening 25.4 cm (10 in) coil
Size (HxWxD) 16.5 cm x 6.35 cm x 1.4 cm (6.5 in x 2.5 in x 1.4 in)
Weight .22 kg (8 oz)
3 Fluke Corporation Fluke Connect™ Modules
(Not compatible with Fluke CNX test tools)