Datasheet

Fluke a3002 FC Wireless AC/DC
Current Module
Designed to be used with the i410 or i1010 ac/dc current clamps (not included with
module). AC/DC current module that wirelessly relays measurements from the i410 or
i1010 clamp accessory to other Fluke Connect™ enabled master units, listed below.
• Fluke 3000 FC DMM
• Fluke Ti200/300/400 Infrared Camera
• PC via optional pc3000 FC Adapter
• Fluke Connect Mobile app
a3002 FC main features include:
• Measure up to 400 A ac or 400 A dc with i410 (sold separately)
• Measure up to 600 A ac or 1000 A dc with i1010 (sold separately)
• Use as a standalone meter or as part of the system
• Logging function for recording and saving up to 65,000 readings
• Magnetic hanging strap
Accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative
humidity at 0 % to 90 %. Accuracy specifications take the form of ±([ % of Reading ] + [ Number of least
significant digits ]). Dc ranges are autoranging. Ac accuracy is specified from 1 % to 110 % of the range.
dc accuracy is specified from -110 % to 110 % of range.
AC/DC current
Function Range Resolution Accuracy
1
A dc 1000 A 0.1 A (0.5 % + 3)
A ac 600.0 A 0.1 A (1.0 % + 3)
1
AC accuracy is specified from 45 Hz to 1000 Hz
Maximum voltage between
terminal and earth ground
(module)
30 V dc or ac rms
LCD w/backlight 3 ½ digits, 6000 counts, 4/sec update rate
Log rate/Interval Adjustable by PC from 1 sec to 1 hr, default 1 min
Battery type 2 AA Alkaline batteries, NEDA 15A, IEC LR6
Battery life 400 hours minimum
Memory Record up to 65,000 readings
RF communications 2.4 GHz ISM Band
RF communication range Open air, unobstructed: Up to 20 m
Obstructed, sheetrock wall: Up to 6.5 m
Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m
Operating temperature -10 °C to +50 °C
Storage temperature -40 °C to +60 °C
Temperature coefficient 0.1 X (specified accuracy)/°C (< 18 °C or > 28 °C)
Relative humidity 0 % to 90 % (0 °C to 35 °C), 0 % to 75 % (35 °C to 40 °C),
0 % to 45 % (40 °C to 50 °C)
EMC IEC 61236-1, Portable
Safety compliance Protected to IEC 61010-1, 600 V CAT IV / 1000 V CAT III, 3rd edition
Pollution Degree 2
Certifications CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE
Ingress Protection (IP) rating IP42
Size (HxWxD) 160 mm x 66 mm x 38 mm (6.3 in x 2.6 in x 1.5 in)
Weight 0.255 kg (9 oz)
a3002 FC general specifications
4 Fluke Corporation Fluke Connect™ Modules
(Not compatible with Fluke CNX test tools)