VT02, VT04A, VT04 Visual IR Thermometer Users Manual October 2012, Rev.2, 4/14 © 2012-2014 Fluke Corporation. All rights reserved. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for two years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
Table of Contents Title Page Introduction ................................................................................ How to Contact Fluke ................................................................. Safety Information ...................................................................... Before You Start ......................................................................... Power On and Off ...................................................................... Rechargeable Battery..........
VT02, VT04A, VT04 Users Manual ii
List of Tables Table 1. 2. 3. 4. 5. Title Page Symbols ..................................................................................... Packing List ................................................................................ Features ..................................................................................... Menu Icons ................................................................................. Temperature Measurement Accuracy ........................................
VT02, VT04A, VT04 Users Manual iv
List of Figures Figure 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Title Page Start-Up Screen and Status Indicator ......................................... Rechargeable Battery................................................................. Blend Options ............................................................................. Visual Image Alignment.............................................................. Micro SD Memory Card Warning Icons ......................................
VT02, VT04A, VT04 Users Manual vi
Introduction The VT Series (the Product) are Visual IR Thermometers that combine a center-point temperature measurement with a blended digital image and heat map overlay. The thermal image removes the time necessary for componentby-component measurement associated with a traditional spot thermometer (radiometer). The Product is ideal for electrical, HVAC, and facility maintenance applications. The recommended use model is: 1.
VT02, VT04A, VT04 Users Manual How to Contact Fluke To contact Fluke, use one of these telephone numbers: • USA: 1-800-760-4523 • Canada: 1-800-36-FLUKE (1-800-363-5853) • Europe: +31 402-675-200 • Japan: +81-3-6714-3114 • Singapore: +65-6799-5566 • Anywhere in the world: +1-425-446-5500 Or, visit Fluke's website at www.fluke.com. To register your Product, visit http://register.fluke.com. To view, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals.
Visual IR Thermometer Safety Information • Remove the batteries if the Product is not used for an extended period of time, or if stored in temperatures above 50 °C. If the batteries are not removed, battery leakage can damage the Product. • Follow all battery care and charging instructions in this manual. • Use only specified replacement parts. • Use only the Fluke supplied power adapter to charge the VT04 battery. Table 1 is a list of symbols used on the Product or in this manual. Table 1.
VT02, VT04A, VT04 Users Manual Before You Start Table 2 is a list of all items included with the Product. Table 2. Packing List Description Part Number VT02 Visual IR Thermometer 4253599 VT04A Visual IR Thermometer 4485211 VT04 Visual IR Thermometer 4366444 AA Alkaline Batteries (QTY.
Visual IR Thermometer Power On and Off Power On and Off To turn on the Product, push and hold for 2 seconds. A start-up screen shows on the display and an indicator bar shows the status, see Figure 1. The indicator bar increases on power up and decreases on power down. After the start-up screen, the Product is ready to use. To turn off the Product, push and hold for 2 seconds. The LCD backlight (VT04A and VT04) turns off to save battery power if a button is not pushed for more than 2 minutes.
VT02, VT04A, VT04 Users Manual Rechargeable Battery The VT04 has a rechargeable Li-ion battery. Note New batteries are not fully charged. Two to ten normal charging/discharging cycles may be required before the battery charges to its maximum capacity. Before using the VT04 for the first time, charge the battery: 1. Plug the ac power supply into an ac wall outlet. 2. Connect the micro-USB connector to the VT04. See Figure 2. While the battery is charging, shows on the display and the status LED is red.
Visual IR Thermometer Features and Controls Features and Controls Table 3 is a list of the Product features with the location of each control. Table 3. Features VT02 VT04A/VT04 7 1 6 2 11 12 8 VT04 only 3 5 9 10 4 hak04.eps Item Description LCD Display Power On/Off and Menu Micro SD Memory Card Slot Tripod Mount Select/Enter Infrared Lens Rotating Lens Cover (VT02) Visual Camera Trigger for Image Capture Battery Cover Micro USB Connector (Input 2.
VT02, VT04A, VT04 Users Manual Button Operation Two functions are accessed directly from the buttons: Blending/Capture and Save. The arrow buttons are used for menu navigation. Image Blending Image blending makes it easier to understand infrared heat maps through the use of an aligned visible image and infrared heat map. The Product captures a visible image with each infrared heat map to exactly show the target area and more effectively share it with others.
Visual IR Thermometer Button Operation Visual Image Alignment Control The heat map overlay and the visual camera are positioned vertically in the VT Series. This vertical parallax will change with distance to your object. To correct the parallax for a near or far distance, you have a visual image alignment control. See Figure 4. To toggle the control between a near object or far object: 1. Push NEAR () for a measurement distance from 15 cm to 23 cm (6 in to 9 in). 2.
VT02, VT04A, VT04 Users Manual Capture and Save The Product saves up to 10,000 images/GB on the micro SD memory card. Note Use the micro SD memory card to download images from the Product to a PC. The micro-USB cable is for battery charging only. To capture the image and save it to memory: 1. Point the Product at the object or area of interest. 2. Pull the trigger to capture the image. The image remains frozen for about 4 seconds. Next, a dialog box prompts you to save or discard the image. 3.
Visual IR Thermometer Menu Functions Menu Functions To open the display menu, push . The menu has options for memory, emissivity, background temperature, hot and cold markers, date, and time. For the VT04A and VT04, menu options that are set by you are saved in memory and remain as set each time you turn off and turn on the Product. At power on the start-up screen briefly shows the current settings for your review.
VT02, VT04A, VT04 Users Manual Push to select the menu option and edit the value. The / buttons change the value of the menu selection. After adjustments are made, push to accept a new value and exit the edit mode. See Figure 7. D/C to highlight to select (color inverts) F D/C change values F accept new value hak08.eps Figure 7.
Visual IR Thermometer Menu Functions Table 4 is a list of the menu icons and their descriptions. Table 4.
VT02, VT04A, VT04 Users Manual Review Memory The Memory mode lets you view the stored images. You can also delete images in this menu. 1. Highlight the Memory icon. 2. Push to open the Memory mode. 3. Push / to scroll through and review the stored images. 4. Push to delete image. Emissivity The emissivity is adjustable in 0.01 steps from 0.10 to 01.00. The default value is set at 0.95. The correct emissivity values are important for you to make the most accurate temperature measurements.
Visual IR Thermometer Menu Functions Temperature Measurement All objects radiate infrared energy. The quantity of energy radiated is based on the actual surface temperature and the surface emissivity of the object. The Product senses the infrared energy from the surface of the object and uses this data to calculate an estimated temperature value.
VT02, VT04A, VT04 Users Manual Table 5 shows the distance to area ratio (D:S) for measurement accuracy. Table 5. Temperature Measurement Accuracy A B C S A B C D For best temperature accuracy, strive for a full field of view. hak09.eps Model VT02 VT04A VT04 16 D:S A B C 38 mm @ 230 mm 60mm @ 360 mm 100 mm @ 600 mm 1.5 in @ 9 in 2.4 in @ 14.5 in 4 in @ 24 in 26 mm @ 230 mm 40 mm @ 360 mm 67 mm @ 600 mm 1 in @ 9 in 1.6 in @ 14.5 in 2.
Visual IR Thermometer Menu Functions Figure 8 shows how the D:S ratio compares on-screen for both models. The higher the ratio, the smaller the target area needs to be for an accurate measurement. Figure 9 illustrates the detection ability. VT02 D:S = 6:1 VT04A/VT04 D:S = 9:1 hak21.eps Figure 8. On-Screen Comparison of D:S Ratio A B Can detect a 1" spot in your field of view that is at least 5 °C different from the surrounding area.
VT02, VT04A, VT04 Users Manual Color Palette The Palette menu changes the false-color presentation of the infrared images that are on the display or captured. A variety of palettes are available. Some palettes are more suitable for specific applications and are set as required. Grayscale Palettes offer an equal, linear presentation of colors that allow for best presentation of detail. The High Contrast palette offers a weighted presentation of colors.
Visual IR Thermometer Menu Functions Temperature Units The Product shows temperatures in °C or °F. Date and Time In the Clock menu the user can set the time and the date. Push to select the Clock. hak12.jpg 1. Push again to select the date type. Move through the menu selections with the / buttons. Selections are: • DD/MM/YYYY • MM/DD/YYYY 2. 3. 4. 5. 6. 7. 8. Move down to the date. Use / to select each date item. Use / to change the value. Push to set the value.
VT02, VT04A, VT04 Users Manual High/Low Temperature Alarm (VT04A, VT04) High temperature and low temperature alarms are available on the VT04A and VT04. The temperature threshold is set for either the high or low alarm. When an alarm is set, you can quickly scan the scene and find objects that are above or below the threshold. An alarm condition is clearly shown on the screen as a flashing red/black band (High) or blue/black band (Low). See Figure 10.
Visual IR Thermometer Menu Functions Time-Lapse Image Capture (VT04A, VT04) The VT04A and VT04 have a time-lapse feature that monitors equipment with captured images at a user-set time interval. The user selects from a menu of preset values for both the time interval and duration. By default, the file name for these captured images includes an S, for example, XXXS.is2.
VT02, VT04A, VT04 Users Manual Auto-Monitor Alarm (VT04A, VT04) The Auto-Monitor Alarm feature is similar to the high/low temperature alarm feature. The difference is that instead of a flashing warning, the Product saves an image. When the temperature of an object in the scene goes above or below the threshold value, the Product saves the image. By default, the file name for these captured images includes an A, for example, XXXA.is2.
Visual IR Thermometer Menu Functions To prevent too many images being saved, there is a 10-minute delay between saved images. The delay applies only when a temperature threshold is breached and stays breached. When the scene temperature goes below (or above for low alarm) the threshold temperature, the delay is reset to zero. See Figure 11 for typical scenarios. Threshold Saved Image Time 10 20 30 40 50 60 70 80 90 Time Time Time hak20.eps Figure 11.
VT02, VT04A, VT04 Users Manual Auto Off (VT04A, VT04) The Auto Off feature turns off the Product after a selected time interval. The default setting is 10 minutes and is user-selectable as 5, 10, 15, or 20 minutes of inactivity. LCD Brightness (VT04A, VT04) The brightness of the LCD backlight has a low, medium, and high setting. High brightness is the default. BMP File Format (VT04A, VT04) The Product includes a feature to save images to the micro SD card in .bmp format instead of the default .
Visual IR Thermometer Measurements Measurements The temperature measurement of the center area is shown at the top of the display. The emissivity setting also shows at the top of the display. When the hot and cold markers are turned on, move the Product until the hot or cold spot coincides with the middle measurement area. Point the Product at an object that is likely to be hotter or colder than its surroundings for best results. The value of the hot/cold point shows at the top of the screen.
VT02, VT04A, VT04 Users Manual Maintenance Maintenance is not necessary for this Product. Warning To prevent possible electrical shock, fire, or personal injury, use only specified replacement parts. Caution To prevent damage to the Product, do not leave the camera exposed to a heat source or high-temperature environments, such as an unattended vehicle in the sun. How to Clean Clean the case with a damp cloth and a weak soap solution.
Visual IR Thermometer Maintenance Battery Care Warning To prevent personal injury and for safe operation and maintenance of the Product: • Batteries contain hazardous chemicals that can cause burns or explode. If exposure to chemicals occurs, clean with water and get medical aid. • Be sure that the battery polarity is correct to prevent battery leakage. • Do not short the battery terminals together. • Keep cells and battery packs clean and dry. Clean dirty connectors with a dry, clean cloth.
VT02, VT04A, VT04 Users Manual VT02, VT04A To replace the batteries: 1. Remove the battery cover from the handle. 2. Remove the discharged batteries. 3. Note Do not charge the batteries included with the VT02 and VT04A models. Install new batteries with the correct polarity, see Figure 12. 2 1 hak06.eps Figure 12. VT02, VT04A Battery Replacement 4. 28 Slide battery cover into place on the handle.
Visual IR Thermometer Specifications VT04 To get the best performance from the Li-Ion battery, use these guidelines: • Do not store the Product on the charger for more than 24 hours as reduced battery life may result. • Charge the Product for a 2-hour minimum at least every six months to maximize battery life. • Without use, the battery will self-discharge in approximately 6 months. Batteries stored for long periods may require two to ten charging cycles before it reaches full capacity.
VT02, VT04A, VT04 Users Manual Image Presentation Palettes VT02 ................................................................Ironbow, Rainbow, Rainbow High Contrast, Grayscale (white hot) and Grayscale (black hot) VT04A, VT04 ...................................................Hot Metal, Ironbow, Rainbow, Rainbow High Contrast, Grayscale (white hot) and Grayscale (black hot) Level and Span ...................................................
Visual IR Thermometer Specifications Controls and Adjustments VT02 • • • • • Select Color Palette User-Selectable Temperature Scale (°F/°C) Time/Date Set Emissivity Selection Reflected Background Temperature Compensation LCD Brightness Auto Off Factory Reset BMP Save High/Low Temperature Alarm Time-Lapse Image Capture Auto-Monitor Alarm VT04A • • • • • • • • • • • • VT04 • • • • • • • • • • • • ® Software.................................................................
VT02, VT04A, VT04 Users Manual Batteries Type VT04 ................................................................Li-ion Rechargeable, 3.6 V, 2250 mAh, 8.1 Wh VT02, VT04A ...................................................4 AA, LR6 1.5 V Battery Life ..........................................................8 hrs Power Save .........................................................Power down after 10 minutes of inactivity Standards Electromagnetic Environment .............................