Datasheet

2 Fluke Corporation Fluke 1736 and 1738 Three-Phase Power Loggers
Conduct multiple studies with
one instrument; download
while studies are in progress
via USB stick or Fluke Connect
mobile app.
Suitable for NEC 220 load studies
Discover the source of voltage
and current distortion that may
be affecting your equipment
Capture voltage events and
inrush currents with pre-defined
thresholds
Simple setup means all available
measured parameters are
automatically selected during
logging so you can be sure you
have the data you need, even
before you know you need it
• Fully integrated logging: Connect other
Fluke Connect devices to the Fluke 1738 to
simultaneously log up to two other measure-
ment parameters, virtually any parameter
available on a Fluke Connect wireless digital
multimeter or module.*
• Energy Analyze Plus application software:
Download and analyze every detail of energy
consumption and power quality state of health
with our automated reporting.
Log the most common parameters
Designed to measure the most critical three-
phase power parameters, the 1736 and 1738
can simultaneously log rms voltage, rms current,
voltage and current events, voltage and current
THD, voltage and current harmonics up to the
50th harmonic, active power, reactive power,
power factor, active energy, reactive energy, and
more. With enough memory for more than a year
of data logging, the 1736 and 1738 can uncover
intermittent or hard-to-find issues that might
otherwise have been missed.
Load studies: verify electrical system capacity
before adding loads
Energy assessments: quantify energy consump-
tion before, and after improvements, to justify
energy saving devices
Harmonics measurements: uncover harmonic
issues that can damage or disrupt critical
equipment
Voltage and current event capture: monitor for
dips, swells and inrush currents that cause false
resets or nuisance circuit breaker tripping
*Not all models are available in all countries. Check with your
local Fluke representative.
Applications