Datasheet

ScopeMeter 190 Series II Fluke Corporation 7
190-062 190-102 190-202 190-104 190-204 190-504
Environmental
Operating temperature 0 °C ~ +40 °C; 0 °C ~ +50 °C excluding battery
Storage temperature -20 °C ~ +60 °C
Humidity +10 °C ~ +30 °C: 95 % RH non-condensing
+30 °C ~ +40 °C: 75 % RH non-condensing
+40 °C ~ +50 °C: 45 % RH non-condensing
Maximum operating altitude Up to 2,000 m (6666 ft) for CAT IV 600 V/CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V/CAT II 1000 V
Maximum storage altitude 12 km (40,000 ft)
Electro-Magnetic-
Compatibility (EMC)
EN 61326 (2005-12) for emission and immunity
Interfaces Two USB-ports provided. Ports are fully insulated from instrument’s floating measurement circuitry USB-host
port directly connects to external flash memory drive (up to 2 GB) for storage of waveform data, complete
datasets in which data and setup information is included, instrument settings and screen copies
A mini-USB-B is provided which allows for interconnection to PC for remote control and data transfer under
PC-control.
Probe calibration output Dedicated probe-cal output with reference contact provided, fully insulated from any measurement
input channel.
Warranty Three years (parts and labor) on main instrument, one year on accessories
Included accessories
Battery charger/mains adapter BC190
Li-Ion battery pack BP290 (2400 mAh) BP291 (4800 mAh)
Voltage probe sets (Each set
includes ground lead, hook
clip, ground spring and probe
tip insulation sleeve)
VPS410-x (one red, one blue) VPS410-x (one red, one grey, one blue, one green)
Test leads TL175 (one red, one black) with test pins —
Other Li-Ion battery (BP290 or BP291, see above), Battery charger (BC190), Hangstrap, Handstrip (user selectable for
left- or right hand use), Multi-language users manuals on CD-ROM, FlukeView
®
demo package (with restricted
functionality), and USB interface cable for PC connectivity