Brochure

PV 350 i200 i410 80K-6
27 II 28 II
IP 67 waterproof & dustproof protection
●●
Withstands 3 meter drop (with holster)
●●
True-RMS measurements
●
Digital display counts 6000 20000/6000
Bright, two-level backlight
●●
Backlit keypad buttons
●●
Reversible, rubber holster
●●
Built-in thermometer
●
Resistance, continuity and diode test
●●
Min/Max and average recording
●●
Improved sleep mode for long battery life
●●
Relative mode to remove test lead resistance
from low ohms measurements
●●
Auto and manual ranging
●●
Safety rating CAT III 1000 V
CAT IV 600 V
CAT III 1000 V
CAT IV 600 V
27II / 28II Rugged IP67 Industrial
Multimeters
Included Accessories
TL 75 Test leads, AC 72 alligator clips, 80BK-A
temperature probe (28 II), holster, manual,
CD-ROM, three AA batteries (installed)
Ordering Information
Fluke 27 II IP 67 Industrial AVG Multimeter
Fluke 28 II IP 67 True-RMS Industrial Multimeter
The NEW Fluke 27 II and 28 II digital
multimeters de ne a new standard for
operating in harsh conditions with the
features and accuracy to troubleshoot
most electrical problems. Both meters
have IP 67 (waterproof and dustproof)
rating, MSHA approvals (pending),
extended operating temperature range
of -15° C to + 55°C and 95% humidity,
and a 3-meter drop. They withstand
hazardous 8.000 volt spikes caused by
load switching and faults on industrial
circuits and complies with second edition
IEC and ANSI electrical safety standards.
Furthermore, the 28 II has a unique
function for accurate voltage and
frequency measurements on adjustable
speed motor drives and other electrically
noisy equipment.
The new Fluke 20 series multimeters
are built to work in the toughest
environments.
Recommended Accessories
Battery Life: 3x AA alkaline, 800 hrs typical
Size (HxWxD): 63.5 x 100 x 198 mm
Features
Specifi cations
Functions Maximum
Max.
Resolution
27 II 28 II
Voltage DC 1000 V 0.1 mV ±(0.1% + 1) ±(0.05% + 1)
Voltage AC 1000 V 0.1 mV ±(0.5% + 3) ±(0.7% + 4)
Current DC 10 A 0.1 μA ±(0.2% + 4) ±(0.2% + 4)
Current AC 10A 0.1 μA ±(1.5% + 2) ±(1.0% + 2)
Temperature -200 ºC to
+1090 ºC
Resistance 0.1 Ω to 50 MΩ
Low pass filter (Measurement on VSD’s) yes
Capacitance 1 nF to 9999 μF
Frequency 0.5 Hz to 199.99 kHz
Peak transient capture 250 μS
Weight: 0.75 kg
Lifetime Warranty
Designed to survive water, dust and rough
handling and yet troubleshoot most electrical
problems
Accuracies are best accuracies for each function
New
11572-eng Rev. 01
On all inputs
Fluke 27 II
Fluke 28 II
True RMS