User Manual
28 II Ex
Users Manual
4
• Do not use the Product in damp or wet
environments.
• Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.
• Examine the case before you use the
Product. Look for cracks or missing
plastic. Carefully look at the insulation
around the terminals.
• Do not use test leads if they are
damaged. Examine the test leads for
damaged insulation, exposed metal, or if
the wear indicator shows. Check test
lead continuity.
• Do not work alone.
• Do not touch voltages >30 V ac rms, 42 V
ac peak, or 60 V dc.
• Use only correct measurement category
(CAT), voltage, and amperage rated
probes, test leads, and adapters for the
measurement.
• Remove all probes, test leads, and
accessories that are not necessary for
the measurement.
• Keep fingers behind the finger guards on
the probes.
• Limit operation to the specified
measurement category, voltage, or
amperage ratings.