User Manual

True-rms Digital Multimeter

Service and Parts

How to Replace the Fuses

Examine or replace the fuses in the Product as follows

(See Figure 11):

1. Turn the rotary switch to OFF and remove the test

leads from the terminals

2. Refer to step 2 in How to Replace the Batteries to

remove the battery door.

3. Carefully lift out the fuse assembly () from the fuse

compartment.

4. Remove the 11 A fuse by carefully prying one end

loose, then lift the fuse out of its bracket ().

5. Install ONLY specified replacement fuses with the

amperage, voltage, and speed ratings shown in

Table 9. The 440-mA fuse is attached to the fuse

assembly. You must use a new fuse assembly to

replace the 440 mA fuse.

6. Install the fuse assembly into the fuse compartment.

7. Refer to How to Replace the Batteries to replace the

battery door.

Service and Parts

If the Product fails, examine the batteries and fuses.

Refer to this manual to make sure the Product is used

correctly.

Replacement parts and accessories are shown in Table 9

and Figure 12.

To order parts and accessories, see How to Contact

Fluke.