User Manual

28 II Ex
Users Manual
2
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
Symbols used on the Product and in this manual are
explained in Table 1.
To ensure safe operation of the Product, obey all
instructions and warnings contained in this manual.
Ex Safety Information
Note
Go to www.ecom-ex.com or www.fluke.com to
download the EU Declaration of Conformity and
Ex certificate for this product. You can also order
a copy from Fluke.
This manual contains information and safety regulations
that must be followed for safe, reliable operation of the
Product in hazardous areas under the described
conditions. Failure to follow the information and
instructions can have dangerous consequences, or may
contravene applicable legislation.
Read this manual before you use the Product.
If there is a question (because of translation and/or
printing errors), refer to the English manual.
XW Warning
To prevent electric shock or personal injury
while in Ex-HAZARDOUS areas, follow these
guidelines:
• Do not open the Product while in an
Ex-hazardous area.
• Change the Product’s batteries only
outside Ex-hazardous areas.
• Do not take spare batteries into
Ex-hazardous areas.
• Use only type-approved batteries in the
Product. See item 5.1 in the Safety
Information for a list of approved
batteries.
• Do not replace fuses while in an
Ex-hazardous area.
• Use only fuses approved for
Ex-hazardous areas in this Product. See
item 5.3 in the Safety Information for a
list of approved fuses.
• Use the Product only when the specified
connection values are met.
• After you use the Product on a non-i.s.
protected circuit, wait 3 minutes before
you take the Product into an
Ex-hazardous area.