Brochure

11343-eng Rev. 01
350 Series AC/DC Clamp Meters
True-RMS, 2000 A Clamp Meters
for industrial and utility applications
Confidently take reliable readings with
the true-rms, Fluke 353/355 Clamp Meters;
the tools of choice for high current
measurement up to 2000 A. The extra-wide
jaw easily clamps around large conductors,
typically found in high current applications.
The rugged design and CAT IV 600 V,
CAT III 1000 V ratings add an extra
element of protection when taking
high-powered measurements.
Accurate peak measurements can be taken
using the in-rush current mode - ideal for
motors and inductive loads. The 355 also
measures voltage and resistance, making
this the most versatile tool for utilities,
electrical contractors and industrial service
technicians.
Included Accessories
Fluke 353: C43 Soft Meter Case, 6 AA
batteries, users manual
Fluke 355: C43 Soft Meter Case, 6 AA
batteries, TL224 SureGrip
®
Silicone Test Lead
Set, TP2 Slim Reach Test Probe Set (2 mm),
AC285 SureGrip
®
Alligator Clip Set, users
manual
Ordering information
Fluke 353 AC/DC Clamp Meter
Fluke 355 AC/DC Clamp Meter
Fluke 353
Fluke 355
Power Supply: 6 x 1.5V AA NEDA 15A
or IEC LR6
Battery Life: 100 hours (with typical usage,
backlight off)
Size (HxWxD): 300 mm x 98 mm x 52 mm
Jaw opening: 58 mm
Weight: 0.814 kg
Two year warranty
TL223 (Fluke 355) L215 (Fluke 355)
Recommended Accessories
New
Features
Specifications
(Check the Fluke web for detailed specifications)
Functions Range 353 355
Current AC/DC 0-40.00 A 1.5% ± 15 counts 1.5% ± 15 counts
0-400.0 A
1.5% ± 5 counts 1.5% ± 5 counts
0-2000 A; 1400 AC rms
Crest Factor 2.4 2.4
Voltage AC/DC 0-4.000 V 1% ± 10 counts
0-40.00 V
0-400.0 V 1% ± 5 counts
0-600 V AC rms
0-1000 V DC
Resistance 0-400.0 Ω
0-4.000 kΩ
1.5% ± 5 counts
0-40.00 kΩ
0-400.0 kΩ
Continuity beeper Appr. ≤ 30 Ω
Frequency 5.0Hz to 100.0Hz 0.2% ± 2 counts
100.1Hz to 999Hz 0.5% ± 5 counts
●●
●●
●●
●●
●
●
●
353 355
True-RMS measurements
Display backlight
Motor start-up current
Min/Max/Average
Voltage AC/DC
Resistance measurement
Continuity measurement with beeper
True RMS