Cut Sheet
Clamp Meter
Product Specifications
3
Amps Frequency: Flexible Current Probe
Range .................................................................... 5.0 Hz to 500.0 Hz
Resolution ............................................................. 0.1 Hz
Accuracy ................................................................ 0.5 % 5 digits
Trigger Level .......................................................... 5 Hz to 20 Hz, 25 A
20 Hz to 100 Hz, 20 A
100 Hz to 500 Hz, 25 A
Resistance
Range .................................................................... 60.00 k
6000
600.0
Resolution ............................................................. 0.1 (600.0 )
1 (6000 )
10 (60.00 k)
Accuracy ................................................................ 1 % 5 digits
Capacitance
Range .................................................................... 1000 F
Resolution ............................................................. 0.1 F (100.0 F)
1 F (1000 F)
Accuracy ................................................................ 1 % 4 digits
Mechanical
Size (L x W x H) .................................................... 274 mm x 86 mm x 47 mm
Weight (with Batteries) ........................................... 463 g
Jaw Opening .......................................................... 34 mm
Flexible Current Probe Diameter ............................ 7.5 mm
Flexible Current Probe Cable Length
(head to electronics connector) .............................. 1.8 m
Rogowski Coil Length ............................................ 450 mm
Environmental
Operating Temperature .......................................... -10 °C to 50 °C
Storage Temperature ............................................. -40 °C to 60 °C
Operating Humidity (without condensation) ............ Non condensing (<10 °C)
90 % RH (10 °C to 30 °C)
75 % RH (30 °C to 40 °C)
45 % RH (40 °C to 50 °C)
Temperature Coefficients ....................................... Add 0.1 x specified accuracy for each degree C >28 C or <18 C
Ingress Protection .................................................. IEC 60529: IP30 (jaw closed)
Operating Altitude .................................................. 2000 m
Storage Altitude ..................................................... 12 000 m
Electromagnetic Compatibility (EMC)
International ....................................................... IEC 61326-1: Portable Electromagnetic Environment
IEC 61326-2-2, CISPR 11: Group 1, Class A
Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is
necessary for the internal function of the equipment itself.
Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a
low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential
difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated
disturbances.
Caution: This equipment is not intended for use in residential environments and may not provide adequate protection
to radio reception in such environments.
Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.
Korea (KCC) ...................................................... Class A equipment (Industrial Broadcast & Communications
Equipment)
Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should
take notice of it. This equipment is intended for use in business environments and not to be used in homes.
USA (FCC) ........................................................ 47 CFR 15 subpart B. This product is considered an exempt device per
clause 15.103.