User Manual

414D/419D/424D
Users Manual
28
419D/424D
To find a distance with two measurements
(Pythagoras 1):
1. Push
 1x.  shows on the display.
2. Point the laser at the top point (1). See Figure 16.
3. Push
.
4. Point the laser at the second target (2).
5. Make sure that the Meter is perpendicular to the wall.
6. Push
 for the second distance measurement.
The Meter shows the height in the summary line. The
distance of the second measurement shows in the
secondary line.
To find a total distance with three measurements
(Pythagoras 2):
1. Push
 2x.  shows on the display.
2. Point the laser at the first target. See Figure 17.
3. Push
 for the first distance (diagonal)
measurement.
4. Point the laser at the second target (2).
5. Make sure that the Meter is perpendicular to the wall.
6. Push
 for the second distance.
7. Point the laser at the third (3) target.
8. Push
 for the third distance measurement.
The Meter shows the result in the summary line. The
measured distance to the subsequent measurement
shows in the second line.
To find a partial distance, see Figure 18, with three
measurements (Pythagoras 3):
1. Push
 3x. The laser turns on and  shows on the
display.
2. Point at the top target (1).
18
1
2
3
gwo15.eps
3. Push . The Meter stores this measurement value.
4. Point the laser at the second diagonal target (2).
5. Push
 for the second distance measurement.