Datasheet

• Remove the batteries if the Product is not used
for an extended period of time, or if stored in
temperatures above 50 °C. If the batteries are not
removed, battery leakage can damage the
Product.
• Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
• The battery door must be closed and locked
before you operate the Product.
Symbols
Symbol Meaning

Risk of Danger. Important information. See Manual.

Hazardous voltage

Double insulation

Battery

Conforms to European Union directives.

Conforms to relevant North American Safety
Standards.

Conforms to relevant Australian EMC requirements.

Examined and licensed by TÜV Product Services.

Earth ground

AC- alternating current

DC- direct current

This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The affixed label
indicates that you must not discard this
electrical/electronic product in domestic household
waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I, this
product is classed as category 9 "Monitoring and
Control Instrumentation” product. Do not dispose of
this product as unsorted municipal waste. Go to
Fluke’s website for recycling information.
CAT II
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points of low voltage mains installation.
CAT III
Measurement Category III is applicable to test and
measuring circuits connected to the distribution part of
the building’s low-voltage MAINS installation.
CAT IV
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
The CAT ratings apply to the handheld accessories only. The Product
is rated to 30 V maximum.