Datasheet

ManualsBrandsFluke ManualsCalibration MetersProcess Multimeter, 400Ohm ... 40MOhm

TECHNICAL DATA

Fluke 787B and

789 ProcessMeter

™

KEY DMM MEASUREMENTS

Measure ac and dc volts, ac and dc

current, resistance, continuity, and

frequency

KEY mA LOOP FUNCTIONS

20mA current source/simulate,

simultaneous mA and % scale readout,

and 24 V loop power supply (789 only)

SAFETY RATED FOR INDUSTRIAL

APPLICATIONS

CAT IV 600 V/CAT III 1000 V

Double the troubleshooting power so you can do

more, while carrying a lot less

The Fluke 787B and 789 ProcessMeter

™

double troubleshoot-

ing capabilities by combining the power of a safety rated digital

multimeter and mA loop calibrator into a single, compact test tool.

Whether you only need to source and simulate mA, or need a 24V

loop power supply, Fluke has a ProcessMeter

™

test tool designed

specifically to meet your needs. Based on the trusted measure-

ment capabilities of the Fluke 87 DMM, the 787B and 789 add the

ability to measure, source and simulate mA with the accuracy and

resolution you would expect from a Fluke mA loop calibrator, giving

you the ideal tool for troubleshooting and calibrating current loop

applications.

With Fluke Connect

mobile app and desktop software compatibil-

ity technicians can wirelessly monitor, log, and share data from the

field with their team anytime, from anywhere*.

787B and 789 key features

• 20 mA dc current source/measure/simulate

• Simultaneous mA and % of scale readout

• DMM designed to meet 1000 volt IEC 61010

CAT III and 600 V CAT IV standards

• Fluke Connect

compatibility for wireless data logging

(with IR3000FC module)*

• Precision 1000 V, 440 mA true-rms digital multimeter

• Frequency measurement to 20 kHz

• Min/Max/Average/Hold/Relative modes

• Diode test and continuity beeper

• Manual step (100 %, 25 %, Coarse, Fine) plus Auto Step and

Auto Ramp

• Externally accessible battery for easy battery changes

789 additional features

• 24 V Loop power supply

• HART mode setting with loop power (adds 250 ohm resistor)

*Requires Fluke IR3000FC module (not included)

Not all models are available in all countries. Check with your local Fluke representative.

Summary of content (3 pages)

PAGE 1
TECHNICAL DATA Fluke 787B and 789 ProcessMeter™ Double the troubleshooting power so you can do more, while carrying a lot less The Fluke 787B and 789 ProcessMeter™ double troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Whether you only need to source and simulate mA, or need a 24V loop power supply, Fluke has a ProcessMeter™ test tool designed specifically to meet your needs.
PAGE 2
Measurement function Range and resolution Best accuracy (% of reading + LSD) V dc 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.1 % + 1 V ac (true-rms) 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V 0.7 % + 2 mA dc 30.000 mA .05 % + 2 A dc 1.000 A (0.440 A continuous) 0.2 % + 2 A ac 1.000 A (0.440 A continuous) 1%+2 Resistance 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M 0.2 % + 1 Frequency (0.5 Hz to 20 kHz) 199.99 Hz, 1999.9 Hz, 19.999 kHz .005 % + 1 Diode test 2.
PAGE 3
Preventive maintenance simplified. Rework eliminated. Ordering information 789 ProcessMeter 787B ProcessMeter Save time and improve the reliability of your maintenance data by wirelessly syncing measurements using the Fluke Connect® system. • Eliminate data-entry errors by saving measurements directly from the tool and associating them with the work order, report or asset record. • Maximize uptime and make confident maintenance decisions with data you can trust and trace.