Datasheet

• Horizontal centrifugal double suction pumps –
direct coupled
• Boiler feed pumps (turbine or motor driven)
Positive Displacement Pumps
• Positive displacement horizontal piston pumps
(under load)
• Positive displacement horizontal gear pumps (under
load)
Air compressors
• Reciprocating
• Rotary screw
• Centrifugal with or without external gearbox
• Centrifugal – internal gear (axial meas.)
• Centrifugal – internal gear (radial meas.)
Blowers
• Lobe-type rotary blowers (belt or direct drive)
• Multi-stage centrifugal blowers (direct drive)
Generic gearboxes (rolling element bearings)
• Single stage gearbox
Machine tools
• Motor
• Gearbox input
• Gearbox output
• Spindles – roughing operations
• Spindles – machine finishing
• Spindles – critical finishing
Chiller (refrigeration)
• Reciprocating (Open motor and compressor
separate)
• Reciprocating (Hermetic motor and compressor)
• Centrifugal (Hermetic or Open Motor
Fans
• Belt-driven Fans 1800 to 3600 RPM
• Belt-driven fans 600 to 1799 RPM
• General direct drive fans (direct coupled)
• Vacuum blowers (belt or direct drive)
• Large forced draft fans (fluid film brgs.)
• Large induced draft fans (fluid film brgs.)
• Shaft-mounted intergral fan (extended motor shaft)
• Axial flow fans (belt or direct drive)
Cooling tower drives
• Long, hollow drive shaft (motor)
• Belt drive (motor and fan - all arrangements)
• Direct drive (motor and fan - all arrangemetns
Centrifugal Pumps
Note: height is measured from grade to top motor bearing
• Vertical pumps (12’ to 20’ height)
• Vertical pumps (8’ to 12’ height)
• Vertical pumps (5’ to 8’ height)
• Vertical pumps (0’ to 5’ height)
• Horizontal centrifugal end suction pumps – direct
coupled
3 Fluke Corporation Fluke 805 Vibration Meter
Use the Fluke 805 Vibration Meter to
check these machine categories: