Brochure

820-2 key features
• Identify the running speed of rotating
equipment without stopping the operation
or making contact with machinery
• Stop motion for diagnoses of parasitic
oscillations, flaws, slippage or unwanted
distortions
• Measure speed of rotation or frequency of a
rotating shaft, speaker, or mechanical part
• Identify part numbers or other markings
810 key features
• Unique diagnostic technology identifies
and locates the most common mechanical
faults: bearings, misalignment, unbalance
and looseness
• Repair recommendations on most plant
machines and fault severity scales advise
technicians on corrective action
• Real-time tips and guidance for new users
with on-board context-sensitive help
• Laser tachometer for accurate machine
running speed promotes confident
diagnoses
• Tri-axial accelerometer reduces measure-
ment time by 2/3 over single axis
accelerometers and allows accurate
measurements by a technician with
minimal training
Use the Fluke 810 to diagnose
most common equipment:
Motors
Fans and blowers
Belt and chain drives
Gearboxes
Pumps
Compressors
Spindles
Use the Fluke 820-2 to mea-
sure rotational speed and
perform diagnostic checks on:
Turbines
Variable Frequency Drive motors
Belt driven machines
Roller bearings, shafts, ear teeth
or other machine components
Clutches and cogwheels
Foundations
Spindles
830 key features
• Single laser measurement technology
means reduced errors from backlash
resulting in better data accuracy
• Intuitive guided user interface quickly and
easily complete machine alignments
• Compass measurement mode enables
flexible, reliable and repeatable measure-
ments using an activated electronic
inclinometer
• Dynamic machine tolerance check
provides continuous evaluation of align-
ment adjustments so you know when your
machine in acceptable range
• Unique extend mode handles gross
misalignment by virtually increasing laser
detector size
• All-in-one screen provides severity scale,
misalignment values, and feet correction
amount needed to correct misalignment
Use the Fluke 830 to correct
shaft alignment issues
with motors coupled to:
Fans
Blowers
Gearboxes
Pumps
Compressors
Spindles
805 FC key features
• Innovative sensor and sensor tip design
ensures accurate measurements for overall
vibration measurement, bearing condition
and IR temperature
• Green and red lights minimize user error
by indicating how much pressure to apply
when measuring
• Four-level scale helps you quickly assess
problem severity
• Crest Factor+ provides reliable bearing
assessment using direct sensor tip
measurements between 4k Hz and 20k Hz
• Measure temperature with Spot IR Sensor
to expand your diagnostic power
• Database of real machine vibration levels
provides machine health for 37 machine
categories
* Within provider’s wireless service area. Smart phone, wireless service, and data plan not included
with purchase.
Use the Fluke 805 FC
to check machines in
these categories:
Chillers
Fans
Cooling tower drives
Centrifugal pumps
Positive displacement pumps
Air compressors
Blowers
Machine tools