User Guide

ManualsBrandsFluke ManualsClamp MetersFluke 902 FC HVAC True-RMS Clamp Meter

TECHNICAL DATA

Fluke 902 FC True-rms

Wireless HVAC Clamp Meter

If you are an HVAC technician, you need a reliable clamp

meter to keep up with your demanding world. The Fluke 902

FC delivers the features necessary to diagnose and repair HVAC

systems. Additionally, with Fluke Connect

you can trend mea-

surements, create and send reports right from the field, safely stay

away from live equipment while taking measurements, and more.

Measurement capability

• 600 A ac current measurement

• 600 V ac and dc voltage measurement

• Temperature measurement from -10 °C to

400 °C (14 °F to 752 °F)

• 1000 µF capacitance measurement

• DC Current measurement to 200 µA

• True-rms voltage and current for accurate measurements on

non-linear signals

• Resistance measurement to 60 kΩ

• Min and max recording to capture variations automatically

Features

• Get more done faster and safer than before by connecting your

meter to Fluke Connect and capture measurements wirelessly.

Save your measurement to Fluke Cloud

™ storage for further

analysis or comparison to earlier inspection data.

- Read measurements on your phone at a safe distance,

wearing less PPE while your meter takes the arc blast zone

risks, not you.

- Instantly trend and monitor measurements live on your phone

screen for better troubleshooting results.

LOG AND TREND MEASUREMENTS

Transmit results wirelessly via

Fluke Connect

SAFETY RATING

CAT III 600V / CAT IV 300V

BACKLIT DISPLAY

For working in low-lighting spaces

HVAC SPECIFIC FEATURES

Extended resistance range to measure

a broad set of thermistors, μA DC current

range to measure flame sensor current,

contact temperature, and capacitance

WARRANTY

Three-years

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Summary of content (4 pages)

PAGE 1
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com TECHNICAL DATA Fluke 902 FC True-rms Wireless HVAC Clamp Meter If you are an HVAC technician, you need a reliable clamp meter to keep up with your demanding world. The Fluke 902 FC delivers the features necessary to diagnose and repair HVAC systems.
PAGE 2
Features (continued) - Create and email reports right from the field. When team collaboration is needed use Fluke Connect ShareLive™ video call to share live measurements and discuss next steps with colleagues. - Don’t risk transcription errors, save your measurements directly to your meter from your smartphone with the press of a button.
PAGE 3
Specifications (continued) Mechanical and general specifications Maximum voltage between any terminal and earth ground 600 V Battery type 2 AA alkaline batteries, NEDA 15A, IEC LR6 Temperature Operating: -10 °C to +50 °C (14 °F to + 122 °F) Storage: -40 °C to +60 °C (-40 °F to + 140 °F) Operating humidity Non-condensing <10 °C (50 °F) ≤90 % RH @ 10 °C to 30 °C (50 °F to 86 °F) ≤75 % RH @ 30 °C to 40 °C (86 °F to 104 °F) ≤45 % RH @ 40 °C to 50 °C (104 °F to 122 °F) Altitude Operating: 3,000 m (9,842
PAGE 4
Ordering information 902 FC HVAC Clamp Meter Included 902 FC HVAC Clamp Meter One pair TL75 Test leads One 80BK Integrated DMM Temperature Probe Two AA alkaline batteries Soft carrying case Users’ manual Statement of Calibration Practices Optional accessories TPAK Magnetic Hanging Strap Set up and sustain preventive maintenance practices with ease to help you oversee your complex world with the Fluke Connect system of software and over 40 wireless test tools.