User Manual

902

Users Manual

1. Connect the 80BK Integrated DMM Temperature

Probe to the input jacks noting correct polarity of the

probe.

2. Turn the rotary switch to F.

3. Press A to select °C or °F. The display reflects the

chosen temperature mode.

4. Position the probe to take the measurement. The

reading appears on the display.

Note

To meet stated accuracy, the 80BK and Meter

must be at the same temperature.

XW Warning

To avoid possible electric shock DO NOT apply

the probe tip to any conductor that is greater

than 30 V ac, 42 V peak or 60 V dc to earth.