User Manual

902

Users Manual

Backlight

Press C to toggle the backlight on and off. The backlight

automatically turns off after 2 minutes.

To disable the automatic 2-minute backlight timeout, hold

down

Cwhile turning the Meter on.

MIN MAX Recording Mode

The MIN MAX recording mode captures the minimum and

maximum input values. When a new high or low is

detected, the Meter beeps.

To use this feature:

1. Put the Meter into the desired measurement function

and range.

2. Press Jto enter MIN MAX Mode. MAX is displayed

and the highest reading detected since entering MIN

MAX is displayed.

3. Press Jto step through the minimum (MIN) and

present readings.

4. To pause MIN MAX recording without erasing stored

values, press I. K is displayed.

5. To resume MIN MAX recording, press I again.

6. To exit and erase stored readings, press Jfor at

least two seconds.