User Manual

HVAC Clamp Meter
Using the Meter
19
Display HOLD
XWWarning
To avoid possible electric shock or personal
injury, when Display HOLD is activated, be
aware that the display will not change when
you apply a different voltage.
In the Display HOLD mode, the Meter freezes the display.
The Meter also beeps every 4 seconds and Hflashes
to remind the user.
Press Ito activate Display HOLD; His displayed and
the reading is captured.
To exit and return to normal operation, press I.
Auto Off
The Meter automatically turns off after 20 minutes. The
rotary switch must be turned to “OFF” and then turned back
on for the Meter to restart. Auto Off is disabled during Min
Max mode. To disable Auto Off, hold J when turning
the Meter on.