User Manual

HVAC Clamp Meter

Maintenance

Battery Replacement

XWWarning

To avoid false readings that could lead to

possible electric shock or personal injury,

replace the batteries as soon as the low

battery indicator (B) appears.

Disconnect the test leads before replacing the

batteries.

To replace the batteries (refer to Figure 6):

1. Turn the rotary switch to “OFF” and remove the test

leads from the terminals.

2. Use a Phillips screwdriver to loosen the battery

compartment door screw, and remove the door from

the case bottom.

3. Remove the batteries.

4. Replace the batteries with two new AA batteries.

5. Reattach the battery compartment door to the case

bottom and tighten the screw.