Owners Manual

902 FC
Users Manual
20
Backlight
Push  to toggle the backlight on and off. The backlight
automatically turns off after 2 minutes.
To disable the automatic backlight timeout:
1. Hold  and turn on the Product.
2. Push .
MIN MAX Recording Mode
The MIN MAX recording mode captures the minimum and
maximum input values. When a new high or low is detected, the
Product beeps.
To use this feature:
1. Turn the rotary switch to the desired measurement function.
2. Push  to enter MIN MAX Mode.
 and the highest reading detected since entering MIN
MAX mode show on the display.
3. Push  to step through the minimum (MIN) and present
readings.
4. To pause MIN MAX recording without erasing stored values,
push . shows on the display.
5. To resume MIN MAX recording, push  again.
6. To exit MIN MAX mode and erase stored readings, push 
for at least 2 seconds.