Owners Manual

HVAC True-rms Clamp Meter
Use the Product
21
Display HOLD
In the Display HOLD mode, the Product freezes the display. The
Product also beeps every 4 seconds and flashes to remind
the user.
XW Warning
To avoid possible electric shock or personal injury,
do not use the HOLD function to measure unknown
potentials. When HOLD is turned on, the display
does not change when a different potential is
measured.
1. Push  to activate Display HOLD.
shows on the display, and the reading is stored.
2. To exit and return to normal operation, push .
Auto Off
The Product automatically turns off after 20 minutes. To restart the
Product, turn the rotary switch to OFF and then back on. Auto Off
is disabled during MIN MAX mode.
To disable Auto Off:
1. Hold  and turn on the Product.
2. Push .