User Manual

i3000/i2000 English Instruction Sheet
Page 2
Safety Instructions
In this instruction sheet, a Warning identifies conditions and
actions that pose hazard(s) to the user. A Caution identifies
conditions and actions that may damage the calibrator or the test
instruments.
WX Warning
To avoid electric shock or personal injury:
• Use the Probes only if qualified.
• Use caution during installation and use of
the Probe; high voltages and currents may
be present in circuit under test.
• Have maintenance performed by only
qualified service personnel.
• Protect the probe against water and
humidity.
• Wear protective clothing and gloves as
required.
• Do not install this product on live
conductors. Always de-energize the circuit
under test before installing the flexible
measuring head.
• Always inspect the electronics unit,
connecting cable, and flexible measuring
head for damage before using the Probe.
• Do not use the Probe if damaged.
• Always connect Probe to display device
before installing the flexible measuring
head.
• Never change batteries while measurement
head is installed on conductor.
• Never connect or disconnect the external
power supply while the measurement head
is installed on a conductor.
• Use only the provided original or specified
accessories.
• Use the Current Probe only as specified in
the operating instructions; otherwise the
current probe’s safety features may not
protect you.