Specifications

Battery Charging and Life
7
 Displays the connection type: PoE , 802.1x , fiber
. For 802.1x, a green lock indicates authentication
passed, yellow indicates it is not needed, and a red
closed lock indicates it failed authentication.
Battery Charging and Life
Li-ion Battery
To charge the Li-ion battery, connect the AC adapter to the
battery connector (see Figure 1). You can use the tester
while you charge the battery.
Figure 3 shows how to replace the battery.
When the tester is off, the battery charges in approximately
3 hours.
Note
The battery will not charge if the internal
temperature of the tester is above 113
º F (45ºC).
The battery life is approximately 6 hours during typical
operation. An icon in the upper-left corner of the screen
shows the battery status.
ffy14.eps
Figure 3. How to Remove the Li-ion Battery