62 MAX/62 MAX + Infrared Thermometer Users Manual PN 4060712 April 2012 Rev. 1, 11/12 © 2012 Fluke Corporation. All rights reserved. Printed in China. Specifications are subject to change without notice. All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY This Fluke product will be free from defects in material and workmanship for three years from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf.
Table of Contents Title Page Introduction ................................................................................................................. 1 How to Contact Fluke ................................................................................................. 1 Safety Information ...................................................................................................... 2 Maintenance ...............................................................................................
62 MAX/62 MAX + Users Manual ii
Introduction The Fluke 62 MAX and 62 MAX + Infrared Thermometers (the Product) can determine the surface temperature by measuring the amount of infrared energy radiated by the target’s surface. Note that the Japanese models indicate Celsius only. Warning Read all safety information before you use the Product.
2 MAX/62 MAX + Users Manual Or, visit Fluke's website at www.fluke.com. To register your product, visit http://register.fluke.com. To see, print, or download the latest manual supplement, visit http://us.fluke.com/usen/support/manuals. Safety Information A Warning identifies conditions and procedures that are dangerous to the user. A Caution identifies conditions and procedures that can cause damage to the Product or the equipment under test.
Infrared Thermometer Safety Information • • • • • • See emissivity information for actual temperatures. Reflective objects result in lower than actual temperature measurements. These objects pose a burn hazard. Do not look directly into the laser with optical tools (for example, binoculars, telescopes, microscopes). Optical tools can focus the laser and be dangerous to the eye. Do not look into the laser. Do not point laser directly at persons or animals or indirectly off reflective surfaces.
62 MAX/62 MAX + Users Manual Table 1. Symbols Symbol 4 Meaning Risk of danger. Important information. See Manual. Symbol Meaning This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that you must not discard this electrical/electronic product in domestic household waste.
Infrared Thermometer Safety Information Table 1. Symbols (cont.) Symbol Meaning Symbol Meaning Warning. Laser. Conforms to European Union directives. Battery Conforms to relevant Australian standards.
62 MAX/62 MAX + Users Manual Maintenance Caution To avoid damage to the Product, do not leave the thermometer on or near objects of high temperature. How to Change the Battery To install or change the AA IEC LR06 battery, open the battery compartment and replace the battery as shown in Figure 16. How to Clean the Product Use soap and water on a damp sponge or soft cloth to clean the Product case. Carefully wipe the surface with a moist cotton swab. The swab may be moistened with water. See Figure 17.
Infrared Thermometer Specifications Specifications 62 MAX 62 MAX + -30 °C to 500 °C (-22 °F to 932 °F) -30 °C to 650 °C (-22 °F to 1202 °F) ≥0 °C: ±1 °C or ±1 % of reading, whichever is greater (≥32 °F: ±2 °F or ±1 % of reading, whichever is greater) ≥ -10 °C to <0 °C: ±2 °C (≥14 °F to <32 °F: ±4 °F) < -10 °C: ±3 °C (<14 °F: ±6 °F) Response Time (95 %) Spectral Response Emissivity ≥0 °C: ±1.5 °C or ±1.5 % of reading, whichever is greater (≥32 °F: ±3 °F or ±1.
62 MAX/62 MAX + Users Manual Optical Resolution 10:1 (calculated at 90 % energy) Display Resolution 0.1 °C (0.2 °F) Weight Size ±0.8 % of reading or ±1.0 °C ±0.5 % of reading or ±0.5 °C (2 °F), whichever is greater (1 °F), whichever is greater 1 AA IEC LR06 Battery 10 hours with laser and 8 hours with laser and backlight on backlight on 255 g (8.99 oz) (175 x 85 x 75) mm (6.88 x 3.34 x 2.
Infrared Thermometer Standards and Agency Approval Ingress Protection Rating Drop Test Vibration and Shock EMC IP 54 per IEC 60529 3 meters IEC 60068-2-6 2.5 g, 10 to 200 Hz, IEC 60068-2-27, 50 g, 11 ms EN 61326-1:2006 EN 61326-2:2006 Standards and Agency Approval Compliance ............................................. EN/IEC 61010-1 Laser Safety ............................................ EN 60825-1 Class 2 Implement Standard ...............................
62 MAX/62 MAX + Users Manual The Product 1 2 gtt01.
Infrared Thermometer The Product 3 4 / 5 5 6 Max/Min/Avg/Diff gtt14.
62 MAX/62 MAX + Users Manual 7 + = 10 min OFF gtt16.
Infrared Thermometer The Product 8 10 0ºC 32ºF 9 30 Min 11 12 9 3 6 22ºC 72ºF °F 125 gtt15.
62 MAX/62 MAX + Users Manual 12 13 38 mm @ 300 mm 60 mm @ 100 mm @ 600 mm 900 mm 33 mm @ 300 mm 50 mm @ 600 mm 85 mm @ 900 mm S 1.5" @ 12" 2.4" @ 24" D 62 MAX D:S = 10:1 4" @ 36" S 1.4" @ 12" 2" @ 24" 3.4" @ 36" D 62 MAX + D:S = 12:1 gtt08-11.
Infrared Thermometer The Product 14 70 21 gtt03.
62 MAX/62 MAX + Users Manual 15 75° 225° 75° gtt04.
Infrared Thermometer The Product 16 17 + gtt13.
62 MAX/62 MAX + Users Manual 18