user manual

Using The Test Tool
Triggering on a Waveform
1
29
Isolated Triggering
Use the optically isolated trigger probe (ITP120, optional)
to trigger on an external source, and to isolate the test tool
from a trigger waveform. See Figure 1-17.
To choose the isolated trigger probe, select ‘EXT’ in point
÷ of the previous example. Trigger level is fixed and is
TTL compatible.
Figure 1-17. Isolated Triggering
Triggering on Video Signals
• Apply an interlaced video signal to the red input A.
To trigger on a random video line, continue from point ô
of the previous example as follows:
í Highlight VIDEO on A.
÷ Open the VIDEO TRIGGER
submenu.
û Highlight PAL.
ø Select PAL.
ù Highlight RANDOM.
î Select RANDOM.