User's Manual

ManualsBrandsFluke ManualsTestersFluke T5-1000

Manual Supplement



Manual Title: T5-600/T5-1000 Service Information Supplement Issue: 4

Part Number: 686953 Issue Date: 3/14

Print Date: March 1998 Page Count: 4

Revision/Date:1, 9/01

This supplement contains information necessary to ensure the

accuracy of the above manual.

Summary of content (5 pages)

PAGE 1
Manual Supplement Manual Title: T5-600/T5-1000 Service Information Supplement Issue: 4 Part Number: 686953 Issue Date: 3/14 Print Date: March 1998 Page Count: 4 Revision/Date:1, 9/01 This supplement contains information necessary to ensure the accuracy of the above manual. © 2011-2014 Fluke Corporation. All rights reserved.
PAGE 2
T5-600/T5-1000 Service Information Manual Supplement Change #1, 63860, 67328, 67434 On page 1, replace the Safety Information with the following:  Warning To prevent possible electric shock, fire, or personal injury:  Read all safety Information before you use the Product.  Carefully read all instructions.  Do not use the Product if it is damaged or operating abnormally. Protection may be impaired.  Make sure the battery door is closed and latched.  Inspect the Product and test leads.
PAGE 3
Manual Supplement T5-600/T5-1000 Service Information  Be sure that the battery polarity is correct to prevent battery leakage.  Do not operate the Product with covers removed or the case open. Hazardous voltage exposure is possible.  Use only specified replacement parts.  Have an approved technician repair the Product.  Disconnect power and discharge all high-voltage capacitors before you measure resistance, continuity, capacitance, or a diode junction.
PAGE 4
T5-600/T5-1000 Service Information Manual Supplement Resolution and Accuracy Function T5-600 Range T5-1000 Range Resolution Accuracy  600 V rms 1000 V rms 1V (1.5 % + 2 digits)  600 V 1000 V 1V (1 % + 1 digit)  100.0 A 100.0 A 0.
PAGE 5
Manual Supplement T5-600/T5-1000 Service Information On page 3 and 4, replace the Serial Number 79559999 and Below General Specifciations table, with: Software Version N/A General Specifications Calibration One-year calibration cycle.