User's Manual

VR1710 Users Manual Supplement
1/10 3
Change #3
On page 7, replace step 3 and Figure 3 with:
3. Click on (VR1710 Settings).
From the Settings screen, you can specify the following:
 Recording interval from 1 second to 20 minutes. To
change the interval setting, recorded data must first be
erased.
 Dip and Swell thresholds from 0 V to 300 V.
 Circular memory on or off. Circular memory on will
continuously record, writing over old data when memory
is full. Circular memory off will stop recording when
memory is full.
 Disable transients (will not record detected transients).