Product Brochure

FLUSHMATE
®
is Quieter
The bowl design is primarily responsible for the sound
produced during a flush. FLUSHMATE
®
engineering can measure
any phase of the flush cycle and examine the sound in a
multitude of ways using advanced software and their acoustical
full reverberation chamber. Toilets from around the world are
tested, producing information to help manufacturers improve
bowl design. Based on sound test evaluations, the sound of
FLUSHMATE-equipped toilets is comparable to most other
low-consumption toilets.
T I M E
The peak flow of pressure-
assist technology is more
than double that of
gravity-type fixtures at
70 gallons/265 liters per
minute. It’s a remarkable,
simple and effective
design that has made
FLUSHMATE
®
the
performance leader in
pressure-assist flushing.
Since a pressure-assist
bowl does not require a
siphon to extract waste,
the trap dimension is the
same throughout. This
allows for the easy
removal of waste
throughout the trapway.
In combination with a
specifically designed jet
at the entrance of the
trapway, FLUSHMATE-
equipped toilets rapidly
push the waste out of
the bowl.
FLUSHMATE-equipped
toilets stay cleaner due
to a large water surface
area and vigorous
flushing action.
Water is contained in
the FLUSHMATE vessel.
The result is a non-
sweating toilet – so the
floor around the toilet
remains dry. The
additional cost of an
insuliner tank is not
necessary.
Installs in the same
standard dimensional
area as a conventional
water closet, with
no special tools.
Fewer moving parts, so
there’s less chance for
things to go wrong.
FLUSHMATE
®
IV flushes
less than 1.0 gpf/4 liters
per flush. Compared to
other systems,
FLUSHMATE IV saves 40%
to 70% more water.
Superior
Performance
Advanced
Bowl Design
Largest Water
Surface Area
Non-Sweating
Tank
Conventional
Installation
Water
Conservation
How Much Water Does Your Toilet Use?
If your toilet flushes 3.5 gal
/
13 liters per flush, one
person can consume as much as 19.5 gal
/
74 liters*
per day, or 7,135 gal
/
27,010 liters per year.
If your toilet flushes 1.6 gal
/
6 liters per flush, one
person can consume as much as 10 gal
/
39 liters*
per day, or 3,760 gal
/
14,234 liters per year.
If your toilet is equipped with FLUSHMATE IV, one
person can consume as little as 5 gal
/
20 liters per
day, or 1,928 gal
/
7,300 liters per year.
*Includes toilet leakage
FLUSHMATE pressure-assist technology has been successfully used for more than
25 years. With millions of FLUSHMATEs installed, FLUSHMATE has a proven track
record for water savings, reliability, and reduced maintenance.
Both FLUSHMATE systems are designed so that their flush volumes cannot be
adjusted. The water savings are sustained for the life of the fixtures.
Compared to:
3.5 gpf
/
13 Lpf, FLUSHMATE IV toilets
use 73% less water
1.6 gpf
/
6 Lpf, FLUSHMATE IV toilets
use 49% less water
28,000
14,000
21,000
7,000
0
27,010
liters
per year
3.5 gpf/
13 liters
per flush
1.6 gpf/
6 liters
per flush
1.0 gpf/
4 liters
per flush
14,234
liters
per year
7,300
liters
per year
FLU6127.6 Combo Brochure English 12/31/14 9:53 AM Page 1