Safety Instructions

EN
IMPORTANT SAFETY INSTRUCTIONS
WARNING – To guard against injury, basic safety precautions should be
observed, including the following:
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS
and all the important notices on the appliance before using. Failure to do
so may result in loss of fish life and/or damage to this appliance.
2. DANGER – To avoid possible electric shock, special care should be taken
since water is employed in the use of aquarium equipment. For each of the
following situations, do not attempt repairs yourself; return the appliance
to an authorized service facility for service or discard the appliance.
A. If the appliance shows any sign of abnormal water leakage, immediately
unplug it from the power source.
B. Carefully examine the appliance after installation. It should not be
plugged in if there is water on parts not intended to be wet. If the
appliance or any part of it falls into the water DO NOT reach for it. First
unplug the unit before retrieving.
C. Do not operate any appliance if it has a damaged cord or plug, or if it is
malfunctioning or it is dropped or damaged in any manner. The power
cord of this appliance cannot be replaced; if the cord is damaged, the
appliance should be discarded. Never cut the cord.
D. To avoid the possibility of the appliance
plug or receptacle getting wet, position
the appliance to one side of a wall
mounted receptacle to prevent water
from dripping onto the receptacle or
plug. A “drip loop” (see illustration)
should be arranged by the user for
the cord connecting appliance to a
receptacle. “The drip loop” is that part of the cord below the level of
the receptacle or the connector if an extension cord is used, to prevent
water from travelling along the cord and coming in contact with the
receptacle. If the plug or receptacle does get wet, DO NOT unplug the
cord. Disconnect the fuse or circuit breaker that supplies power to the
appliance. Then unplug and examine for presence of water in receptacle.
3. This appliance is not intended for use by persons (including children) with
significantly impaired physical or mental capabilities, unless they have
been given supervision or instruction concerning the use of the appliance
by a person responsible for their safety. Children should always be
supervised to ensure that they do not play with the appliance.
4. To avoid injury, do not touch moving parts or hot parts.
5. CAUTION - Always unplug or disconnect all appliances in the aquarium
from electricity supply before placing hands in water, before putting on or
taking off parts and while the equipment is being installed, maintained or
handled. Never yank cord to pull plug from outlet. Grasp the plug and pull to
disconnect. Always unplug an appliance from an outlet when not in use.
6. Do not install or store the appliance where it will be exposed to weather
or temperatures below freezing. FOR INDOOR HOUSEHOLD USE ONLY. DO
NOT IMMERSE.
7. Make sure the appliance is mounted correctly and securely positioned on
the aquarium before operating the appliance.
8. If an extension cord is necessary, a cord with proper rating should be
used. A cord rated for less amperes or watts than the appliance rating may
overheat. Care should be taken to arrange the cord so that it will not be
tripped over or pulled. The connection should be carried out by a qualified
electrical installer.
9. Use only with AC adapter supplied with this product.
10. The socket-outlet shall be installed near the equipment and shall be easily
accessible.
11. LED power supply shall not be positioned on or into the cover frame.
12. “Z” attachments: The external flexible cable or cord of this luminaire
cannot be replaced; if cord is damaged the luminaire shall be destroyed.
13. This luminaire can be mounted on any aquarium with glass thickness of
between 3mm and 15mm.
SAVE THESE INSTRUCTIONS
For the complete use and understanding of this product it is recommended
that this manual is thoroughly read and understood. Failure to do so may
result in damage to this product.
The Fluval Aquasky Bluetooth
®
LED combines super bright 3000-25000 K LEDs with tri-color RGB LEDs
to allow the user to adjust, via Bluetooth
®
enabled smart device, the light spectrum in order to replicate
various environments; and create such effects as cloud cover, fading lunar, storm and lightning.
INSTALLATION AND USAGE:
Please verify that all components of the light fixture are undamaged before putting it into operation.
Before any kind of maintenance, always disconnect electrical supply of the light fixture.
SCAN HERE to learn more
and download the free Fluval Smart app
or search ‘Fluvalsmart’ in app store.
For full instruction manual and video on set up of Bluetooth® application, visit:
fluvalaquatics.com/aquaskybluetooth
FULLY CONTROLLABLE FROM YOUR SMART PHONE OR TABLET
MAINTENANCE:
For maximum LED performance, it is recommended that the fixture and the LED lens be cleaned on a
weekly basis. Unplug transformer prior to cleaning the light fixture. Use both hands when manipulating
this appliance. Wipe exposed surfaces carefully with a damp cloth to remove any dust or mineral
deposits that may collect over time. Do not use detergents or harsh cleaners as it can damage the
light fixture. Use Fluval LED Lens Cleaning Non-Aerosol Spray (A3969) to clean the LED portion of the
light fixture. Make sure all surfaces are dry before re-connecting the transformer to the power source.
BASIC TROUBLE SHOOTING
If the fixture does not work, ensure that all plugs and wires are firmly connected, ie: connection from
fixture to transformer, and connection from transformer to electrical outlet.
Model:
A13291 A13292 A13293 A13294
Input Volts:
100-240 V 100-240 V 100-240 V 100-240 V
Operating Volts: 24 V 24 V 24 V 24 V
Size
Adjustment:
2
1.6" ( 55 cm) 29.5" (75 cm) 37.5" (95 cm) 45.3" (1.15 m)
No. of LEDs: 42 42 63 63
Wattage: 12.5 16.5 21 24
Lumens: 1000 1300 1600 1950
Life in Hours: 50 000 50 000 50 000 50 000
WARRANTY
3 YEAR LIMITED WARRANTY
Your Fluval Aquasky Bluetooth
®
LED Strip Light is guaranteed for defective parts and workmanship
for a period of 3 years from the date of purchase. This guarantee is valid with proof of purchase
only. The guarantee is limited to repair or replacement only and does not cover consequential loss,
loss or damage to livestock and personal property or damage to animate or inanimate objects,
irrespective of the cause thereof. This guarantee is valid only under normal operating conditions
for which the unit is intended. It excludes any damage caused by unreasonable use, negligence,
improper installation, tampering, abuse or commercial use. The warranty does not cover wear
and tear or parts which have not been adequately or correctly maintained. Failure of less than
5% of the total number of LEDs shall not be considered a defect under the terms of this warranty.
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
FOR AUTHORIZED WARRANTY REPAIR SERVICE:
For Authorized Warranty Service please return (well packaged and by registered post) to the address
below enclosing dated receipt and reason for return. If you have any queries or comments about the
operation of this product, please let us try to help you before you return the product to your retailer. Most
queries can be handled promptly with a phone call. When you call (or write), please have all relevant
information such as model number, age of product, details of aquarium set-up, as well as the nature of
the problem.
CANADA: Consumer Repair , Rolf C. Hagen Inc., 20500 Trans Canada Hwy, Baie-D’Urfé, QC H9X 0A2
U.S.A.: Rolf C. Hagen (U.S.A.) Corp. , 305 Forbes Blvd, Mansfield, MA 02048
UK: Rolf C. Hagen (UK) Ltd , Customer Service Department California Drive, Whitwood Ind Est.,
Castleford West Yorkshire WF10 5QH http://faq.hagencrm.com/?uk
CALL US ON OUR TOLL-FREE NUMBER:
CANADA ONLY:
1-800-554-2436 between 9:00 a.m. and 4:30 p.m. Eastern Standard Time.
Ask for Customer Service.
U.S. ONLY: 1-800-724-2436 between 9:00 a.m. and 4:00 p.m. Eastern Standard Time.
Ask for Customer Service.
U.K. ONLY: Helpline Number 01977 521015. Between 9:00 AM and 5:00 PM, Monday to Thursday and
9:00 AM and 4:00 PM on Friday (excluding Bank Holidays).
RECYCLING: This symbol bears the selective sorting symbol for waste electrical and
electronic equipment (WEEE). This means that this product must be handled pursuant to
European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on
the environment. Check with your local Environmental Agency for possible disposal
instructions or take to an official council registered refuse collection point. Electronic
products not included in the selective sorting process are potentially dangerous for the
environment and human health due to the presence of hazardous substances.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation. Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
The device has been evaluated to meet general RF exposure requirement. The device can
be used in portable exposure condition without restriction.
FCC STATEMENT
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.