User's Manual

Choose to install antenna in car
4
Before using the systemBefore using the system
GPS Antenna
5
Preparation before use
1. Power on/off
Turn on the ACC of the vehicle to on or start
the engine, this machine will be automatically
powered on and started. Starting picture
appears on the monitor. A few seconds later,
the following prompting box appears:
Press (AGREE) button to access to the
screen last time turning off, turn OFF ACC
(turn off engine) to shut down power, the
machine will auto save current page—to
which would be auto accessed when next
time booting.
For safety reason, the machine is
designed for not being able to conduct
complicated operations like destination
setup while driving. Please pull over the
vehicle at a safe place, take stopping
brake, and conduct operation. Driver
shouldn’t conduct such operation while
driving.
Warning:
2. Installation steps
lCheck if the installation accessories are
complete.
lPlease dismantle the original Hi-Fi.
lFasten the positioning bolt and positioning
rubber cap onto the mainframe of the
navigation system. (Some machines models
are not equipped with positioning bolt and
positioning rubber cap, so it’s no need to
install).
lUse the accessory special converting