Flycam Flowline Camera Support (FLCM-FLN-N) Instruction Manual
At Flycam, our goal is to ensure 100% Customer Satisfaction in all that we do. We back our sales with a 1 year warranty from the date of purchase and work hard to resolve any problems in the unlikely event one should arise. With our commitment to continuous improvement and your Feedback, building on our reputation of providing affordable, quality products is PRIORITY #1.
Welcome To Flycam! Dear Client, On behalf of all the people that work so hard to provide you with the most up-to-date, flexible and cost-efficient production gear, we would like to welcome you into the Flycam family. By purchasing your Flycam Flowline Camera Support , you have just joined a host of designers, engineers, machinists, assembly, customer service and office staff that take great pride in all that they do.
Introduction Flycam Flowline is a professional Ergonomic Stabilizing Camera Support which ensures comfort & lets you shoot 24x7. It is designed to reduce the static load on neck and shoulder muscles and distributes it to your torso. Flowline is properly packed in a protective bag pack to ensure safety of the product & for travel convenience. What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
SPECIFICATIONS FLOWLINE 300N FLOWLINE 400N FLOWLINE 500N Product Weight: Complete 4kg (9lb) Complete 4kg (9lb) Complete 4kg (9lb) without packing Mounted: 100 cm (39'') Mounted: 100 cm (39'') Mounted: 100 cm (39'') Folded: 60 cm (23.6'') Folded: 60 cm (23.6'') Folded: 60 cm (23.6'') Capacity: 5 - 8 kg (11 - 17.6 lb) 8 - 10 kg (17.6 - 22 lb) 10 - 12 kg (22 - 26.4 lb) Suspension line 107 cm (42'') when fully 107 cm (42'') when fully 107 cm (42'') when fully length: stretched.
If the shoulder arm is too high or too low, first try adjusting the Support Arm in relation to Support Jacket or hip/waist belt. It is also possible to adjust the tube inside Support Arm, but that might require adjusting the tightness of Suspension Line. If you work with the Flycam Flowline under special conditions, i.e. in a car, boat, plane or helicopter, make sure to use Safety Belt.
Assembling NOTE: Assembling steps are same for all Models. You will receive Flycam Flowline packed in Bag. Open the Bag and take out your Flycam Flowline. Join Support Arm Section with Section on Support Jacket, by simple push-fit technique. Slightly loosen all the four Adjustment Knobs provided on back of Support Jacket to adjust the height of Support Arm.
Wear Support Jacket and tighten the buckles provided at waist and chest. Then adjust until you find it comfortable. Adjust Support Arms on both sides. This will fine tune your Jacket to a comfortable position and also help in shifting weight to your shoulders and hips. Loosen the knob on hook and attach camera with it. Tighten the knob back to ensure slip-free connection.
NOTE: Leave a gap of approximately 2cm/1” between the top of Camera Hook and Support Arm. Finally, attach one end of Safety Belt with camera and other end with Support Jacket, for more safety & protection. When folding Flycam Flowline, always make sure to put the upper part of Support Arm inside hip/waist belt and fasten buckle at the hip/waist belt. This will prevent Suspension Line from wearing.
YOUR FLYCAM FLOWLINE CAMERA SUPPORT ALL DRESSED UP AND READY TO GO! WARRANTY We offer a one year warranty for our products from the date of purchase. We will repair or replace your product, free of charge, in the event of a defect in materials or craftsmanship obtained during normal use or handling based on the user manual. Please note that we will not cover any shipping costs for returning the product to us.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the ,replacement parts only) to the customers after the Warranty Period has expired. We will cover the complete cost of sending replacement parts within the warranty period. After that, Nominal cost of the product & Actual shipping cost will be charged. Do not send the unit to us without first getting a response and getting the approval to send back the item.