User's Manual
6
NOTE: You can also mount your camera using Quick Release Plate.
Open the lever and remove Quick Release Plate from Adapter. Then aach it with your
camera with the help of screw driver. Insert your camera setup into the Adapter and ghten
the lever back.
Adding Weights & Posioning for Proper Balance
Connuing the assembly and balance requirements to make your Flycam Handheld Video
Stabilizer fully funconal you will note that the base plaorm has a provision to mount the
balance weights via 2x BH bolts secured with knobs on both sides of the post.
The purpose of the counter weight system is to match the low end of the stabilizer to the weight
of the camera and accessories at the high/top end with the gimbaled handle as the pivot point in
between.
The heavier the camera and accessories, the more weights are required to achieve proper
balance. Generally as you add weight to one side of the central post, an equal amount has to be
added to the other side to maintain horizontal balance.