Users Manual

Step 3: Position handlebar stem

Your Flyer™ eBike’s handlebar stem is designed to be adjusted for optimal comfort.

A. While holding the front wheel in place, rotate the stem to the rough location depicted below.

B. Align the arrow decals on the frame, stem, and fork to ensure that the Stem is assembled

straight. Check to make sure the cables are not twisted around the stem.

C. While keeping the arrows aligned, tighten the top stem bolt to 6 N-m using the 6mm allen key.

D. While keeping the arrows aligned, tighten the side stem bolts to 6 N-m using the 6mm allen key.

E. Rotate the stem up until it is straight.

F. Push the stem latch closed until you hear a click.

Warning: Failure to properly tighten the stem may result in a loss of steering and could cause

injury or death.