Users Manual

Adjusting Stem Height

The stem height should be set based on your personal preference. The proper stem position is

important to avoid back strain.

WARNING! The stem post must be inserted to the minimum insertion mark. Do not raise the

stem post beyond the minimum insertion marking on the seat post tube. If the stem post is not

inserted properly, the stem may be loose which can lead to serious injury or death.

A. Open the quick release lever located under the handlebar. Rotate the lever fully open to allow the

seat post to slide easily.

B. Move the handlebars up and down by sliding the stem post in or out of the stem tube. Set the

handlebars to the desired height based on rider preference. Ensure that the stem post does not extend

beyond the “minimum seat post insertion” markings on the seat post.