User's Manual

Page
59
of
68
7.8.2 Firmware Upgrade
Webpage
Description
Steps:
Step 1. Press to browser the upgrade file.
Step 2. Press to start upgrading, LCD will display the notice when
upgrading.
Step 3. Login web and then check the firmware whether well upgraded by viewing
the firmware version in Status/Basic webpage.
7.8.3 Provision
1) Provisioning allow IP622C/IP622CWP auto-upgrading or auto-configuring
2) IP622C/IP622CWP supports 3 ways to provision: TFTP, HTTP and HTTPS.

Before testing or using TFTP, user should have tftp server and upgrading file and configuring file.

Before testing or using HTTP, user should have http server and upgrading file and configuring file.

Before testing or using HTTPS, user should have https server and upgrading file and configuring file and CA Certificate file(should
same as https server’s) and Client Certificate file and Private key file
3) User can uploading CA Certificate file and Client Certificate file and Private Key file in Equipment Manage/Cert Manage page.
4) Details please refer to document Provision_User Manual_en_v1.1.doc
Webpage
Field Name
Description
Provision
Enable
If or not enable provision.
Resync On
Reset
If or not enable resync after IP622C/IP622CWP restart.
Resync
Random Delay
Set the maximum delay for request the synchronization
file.