Bracelet User Manual 10086 10086 Foreword Thank you for using Bracelet--mobile phone partner. It is a healthy , Eco-friendly ,high-end ,fashion and wearable product. This manual in includes : product function ,the way of use and the operation instruction .Please read it carefully in order to achieve the best using effect and to prevent unnecessary damage .Do not change the accessories of the unit ,disassemble it .otherwise ,it will beyond the range of the warranty.
Application method 1.Schematic diagram (According to below diagram , it include A key (up key),B key (down key), OLED display screen ,Connection identifier , charging identifier.speaker. Microphone.battery holes) Charing identifier Connection identifier Screen Speaker Microphone A key B key Press the B key for 3 seconds , it will display ”power on” ,again ,it will display ”power off”.
2. Pair and connection First time use , please connect bracelet with mobile phone by Bluetooth. Follow the steps below: Press the B key for 5-6 seconds till the screen display “Pairing”. in this process , it will show “power on ”first ,don’t let go until it shows“ pairing”) Turn on the mobile phone Bluetooth , search device and find “bracelet” ,confirm the connection.
When the phone is being dialed out , “ Call” or “Active Call” is displayed ,press the A key or B key to get through the phone cell.(Notice: “ Call ”shows dialing out ,“Active Call” means the call is being connected. When phone is being answered, short press A key or B key can switch the sound to bracelet and talk by the microphone on bracelet. When the bracelet is connected, long press A key or B key for 3 seconds to hang up. 4.
If the music should be switch back on the mobile phone ,just turning off media audio connection under the mobile phone Bluetooth option, if this operation is being done on the i phone , this can be done directly over the phone. times every 3 seconds ,total 9 times ,and try to connect with phone , meanwhile, it shows “Mobile phone without induction”. It tries to connect once every 10 minutes until connected or press any key to stop connecting.
7. How to wear it Put your hands fiat and keep palm down, wear it from hand side (refer to left picture) Turn to keep it on the best position (refer to right picture) The max width of the legs are 5CM, please do not open it too wide to break it.
OLED screen showing the time Away from the phone radiation Alarm clock reminder Support Chinese traditional; Chinese simplified; English; Korean; Russian; Spanish; French; German language; Italian; Portuguese; Arabic and other languages. Notice : 1.Please keep the charging clamp and bracelet form an angle of 90 degrees when charging. 2.If it cannot be connected with mobile phone or working properly, please reset or charge it. 3.Charge it timely to avoid power off and clock reset . 4.
5.Charging Charging more than 2 hours for the first time. When charging , the screen will display charging logo. 6.Power on and power off Refer to diagram, up key is A key , down key is B key. Non intelligent phone of Bluetooth version <2.1 will be required to input password, the password is “0000”. 7.Incoming calls reminder If properly connected, bracelet will sustained vibrate when calls coming in. It shows caller’s number or name when calls coming in.
8.Anti-lost reminder When the bracelet is 10-20 meters away from the cell phone, bracelet will remind with vibrating, and once every 10 minutes. When cell is connected, short press A key or B key to make the volume+/You can switch the sound between mobile devices and bracelet freely through the Bluetooth setting on mobile. 9.Dial out the last outgoing cell Double-click A key or B key to Dial out the last outgoing call. When lt shows “Call”, press any key can start to talk. 10.
Pressing B key continuously to set the “hour” time. Short press A key to enter the minute adjusting mode, press B key to adjust “minute”. After adjust the minute, short press A key to confirm. Short press any key, the current time will be displayed. Short press any function key, the time on the screen will be displayed lf there is not enough power, Please charge it in time to avoid over discharge, otherwise, the time be disordered. 12.
14. Specifications Model: BRACELET Battery: Lithium polymer Bluetooth version: V3.0 Working voltage: 3.3v~4.2v Working current: 2.
Bluetooth Bracelet 功能说明 连接标识 充电标识 10086 屏幕 A键 B键
产品规格： 产品型号：蓝牙版本：V3.0 工作电压：3.3V~4.2V 工作电流：45mA 以下 工作频率：2.
充电：充电线一端接 USB 接口可充电设备，另一端充电夹子对准产品底部充电孔并夹 紧，OLED 显示屏会出现充电标识。（注：产品内置可充电聚合物锂离子电池，在使用之 前先充电 3 小时以上） 语言版本：支持 12 种语言：中文繁体；中文简体；英语；韩语；俄语；西班牙语；法 语；德语；意大利语；葡萄牙语；阿拉伯语、日语多国语言。 开关机：开关机长按 B 键 6 秒为开关机；开机时屏幕显示英文 Power on；关机时屏幕显 示英文 Power off。手机屏幕显出现“确认联机”样.
（2）在关机状态长按 B 键 6 秒，显示屏出现英文“Pairing”进入对码状态； （3）将手机设置在蓝牙功能开启状态，进入手机蓝牙界面选定“搜索设备”并按 “确定”； （4）手机屏幕出现本产品蓝牙设备“BRACELET”,并确认连接（注：有些手机出现 密码输入界面，输入四位数字密码（0000）后按“确定”）； （5）短按任意功能会唤醒 LED 屏显示时钟。（注：应及时充电以避免电量耗尽造成 时钟重置） 菜单功能： （1）时钟功能 在开机状态下.按 A 键 3 秒进入时间调整状态:显示小时调整，连续按 B 键调准 小时；短按 A 键显示分钟调整.
在配对成功后，按 A 键打开菜单，选择电话簿，短按 B 键，进入电话本同步中 且显示同步多少条；完成后会显示同步完成或者同步失败，同步后来电能显示来 电者姓名和号码。 （3）语言选择功能 选择语言，短按 B 键，进入语言选择菜单，按 A 键选择，再按 B 键确定。 （4）防丢失功能 当您手机的距离超出 10 米，BRACELET 即有节奏振动提醒您不要遗失手 机； （5）来电提醒，来电显示功能 BRACELET 与手机配对成功后在联通状下，BRACELET 对手机来电会持续 振动提醒；
BRACELET 对手机来电会显示来电号码和名字； 直接接听手机或短按任意键可停止振动；若不便接听电话可长按 B 键切断来 电），短按任意键可停止振动响应。（注：在室内或复杂环境下提醒的有效 距离会缩短） (6)通话切换功能 在通话时，双击 B 键，可以把通话声音从蓝牙转到手机，或者从手机转到 蓝牙。 断开与连接： BRACELET 与手机断连后.
产品复位： BRACELET 在电池电量低的状态下工作容易易产生死机状态； 如出现屏幕不显示，与手机不连接、振动混乱等死机状态时，充电即可复位。
