User Manual Make sure you read this guide before using the device. Congratulations on your purchase. Please read and understand all instructions before you use your device. If damage is caused by failure to follow instructions, the warranty does not apply.
Using Micro SD card 1. Insert your card into the micro SD slot until it clicks into place. When ready for use, it’s OK. 2. To remove micro SD Card, press the card lightly; it is partially ejected allowing you to pull the card out. 3. With no card in the micro SD slot, the screen presents “ No Card”. Note: 1. The micro SD Card insert in a wrong way may damage the device and memory card. 2. The device will set the memory card after the card inserted.
2G 30 min 30 min 50 min 1520(pcs) 1440 1380(pcs) 1180(pcs) 1G 15 min 15 min 30 min 760(pcs) 720 690(pcs) 590(pcs) Remark: The number of shots that can be taken will vary depending on device settings, the subject and the memory card used. Charging: The device has a built-in rechargeable battery that has to be charged fully after having been used up for the first three times of charging so as to activate the maximum capacity of the battery.
3. Motion detection: On/Off. The device will start video recording automatically while there is an object moving. During recording, the device will save each video file in every 2 minutes automatically. When there is no object moving in two minutes, it enters into standby state, and re-start when object moving again. 4. Cycle shooting: turn on / turn off 5. Cycle shooting time: the saving time of each section: 2 minutes/ 5 minutes / 10 minutes 6. Sound： Turn on/ off to select the sound 7.
6. Language: English, Chinese (Simplified), Chinese (Traditional), Spanish, French, Portuguese, German. Japanese, Russian 7. TV Systems：NISC/PAL 8.Theme Power Up Image：Turn Off, System, Custom 9.Formatting：Yes/ No 10.Reset to defaults: Yes/ No 11.Version Information：It shows the software information. Press “DOWN/UP” button to select, and press “OK” to confirm. Press “MANU” to exit after setting completed. Setting works after restart the device. Operation Get started and loop shooting 1.
Audio Recording Mode 1. Press “OK” button to get started. 2. Press the “OK” button again in the audio recording state to stop recording and save the audio file. 3. Press the “DOWN” button to pause or begin recording again. Playback Mode 1. Press the “Mode” button three times to enter into playback mode. The upper left corner of screen will display “ Playing” 2. Press the “ DOWN/UP” button to choose the files 3. Press the ”OK” button to playback the files. 4. Press the “DOWN” button to stop or start again.
Focal Range 12cm ~ infinity Display 2.0-inch LTPS TFT LCD AV-OUT TV synthetic signals: NTSC Photo 1.3M,3M,5M,8M Video Format AVI Video 1280*720(30 fps/S);720*480(30 fps/S)；640*480(30 fps/S) Zoom 4X digital zoom Audio External: SDHC SD card(max :32G,SDHC card) Shutter Electronic shutter Shutter speed 1/2~1/1000 s White Balance Auto/Sunny/Cloudy LED light Auto/Open/Close Interface USB2.0 / AV OUT Battery 600mAh USB USB2.0 high speed Size/Weight 119*55*13.
