PW33 User Manual 1 Introduction Thank you for choosing our smart watch phone. Watch phone S8 comes with Android 4.4 system, which supports GSM network (850MHz, 900MHz, 1800MHz, 1900MHz) and 3G network WCDMA 2100MHz. Basic functions of S8 are as follows: 1. Screen resolution: 240*240 pixels, capacitive screen; 2. Built-in GPS; 3. MTK6572 chip; 4. 5M HD camera; 5. RAM: 512MB ROM: 4GB; 6. GPRS, EDGE, HSDAP, HSDAP+, Bluetooth 4.0, WiFi, USB2.
Note: For saving power consumption after using the watch, please deactivate GPS, WiFi and Bluetooth functions and return to the standby state. 2. Safety Precautions * Safety Warnings and Precautions Please read these precautions carefully before using the watch phone to ensure proper use of it. * Please turn off the watch when you are in the plane, hospitals or other places where cell phones are prohibited to be used.
Please ensure the watch is free from damp, water or other liquids which will cause short circuit, leakage or other defects to the watch. 3 Preparations before Using the Watch A. Product Introduction 1: Speaker; 2: Volume; 3: USB Port; 4: Turn On/Off; 5: Camera; 6: MIC; 7: SIM Card Slot 8: 3 virtual buttons on the touch screen Option; Home; Return 9: USB port on the side of the watch multiply works for the headset, data cable and charger. A.
C.
4 Standby interface and clock 4.1 Analog clock: Press “power on” button shortly to turn on/off the analog clock 4.2 Main Menu:When the watch is standby, slip the screen to enter into main menu.
4.2.1 Circles under the main surface means quantity of APP pages in the device, bright circle means current page. Slip the screen freely left or right, then click the Icon to your idea Apps. 4.2.2 Click the icon into to enter into , slip the screen towards right, will enter , you can check Contacts and Logs. 4.2.3 Click the icon to enter into Messaging,slip the screen towards right, enter into you can write or delete message. 5.
Click to enter settings menu 1. Wireless&Network: Setup WLAN (WIFI), Bluetooth, traffic usage. 2. Device: Set the Scene Mode, Display, Storage,batteries. 3.Personal: set Location Information,Safe,Languages and Input Methods, Backing up and resetting and adding account 4. System: Set the Date and Time, Timer, Accessibility features, Developer options, about cell phones 6.
7. Connect PC Watch will auto charging when connect with PC. Watch can be used as a U-disk: When connect watch with PC via usb cable, will display a dialog options as shown, confirm it as usb storage. If return then only charging. 8. Common Troubleshooting If any problems appearred when using the watch phone, please follow below solution ways. If the problems are still existed, please contact the distributor or appointted maintenance personnel The watch phone can not power on.
• After charging parts of power, Battery level indicator might be inaccurate. Please wait about 20minutes to get the accurate indication after removing the battery charger. Cannot connect the network • Please try in another place • Please confirm the net service place from your network supplier • Please make sure your SIM card is effective from your network supplier • Try to select the network by hand • Please try it later if the network is busy.