Watch Phone User Manual
Safety notice Before use, Please read the user manual carefully.
1、Introduction 1.1 Key function introduction 1.Speaker 2.USB/earphone port 5.Power on/off/Return 1.2 Removable battery, install Sim card and Micro sd card Step illustration: 2 • Please try it later if the network is busy. Cannot dial the watch phone • Please make sure the telephone NO. is correct and press the call button • For the internet calling, please check the country code and area code.
Common Troubleshooting If any problems appearred when using the watch phone, please follow below solution ways. If the problems are still existed, please contact the distributor or appointted maintenance personnel The watch phone can not power on. • Press “on” button till startup screen • Check the battery power • Check if the battery poor contact, remove it and install the battery again, then power on No feedback for several minutes • Press “off” key • Remove the battery and install again, then power on.
2.2 Main Memu 4.Click “Notification APP”, can choose which APP notifications need to push to the watch: 1.Display the time and Date 2.The three menuat the botton are: Missed calls, Pedometer and Phone settings 2.
*you can click to choose open and closed about the push ICON means” Open”. notification service to the watch. 3: Click “Accessibility settings” To activate the bluetooth notice. “ ON” means activated state. 8 PS: Looking phone, Reminding, Pedometer, Sleep monitor use the same sensor, so can not use them together at the same time.
3 earphone to the usb port. The earphone line is same as the antenna of radio, so please let it hanging freely Settings 3.1 Bluetooth setting Option Instructions Active bluetooth Can turn on/off the bluetooth Search handfree devices After the activation, it can search the devices to communicate with it My device The searched device name Connecting device Display the connected device name 3.2 Restore factory setting The phone will be restored factory default setting after select this function.
