TIO A M R N NFO I T N RTA use nce O e r P e f e I M befor re re u t d u a f Re for n i a t & re For all customer enquiries or for replacement parts, contact:- ☎ 01325 300303 www.flymo.com eop.customer.services@electrolux.co.
1 Carton Contents Switch levers handguard instruction manual blade cover/storage holder electric mains cable with moulded plug cable holder IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
2 General 1. Never allow children or people unfamiliar with these instructions to use the Hedgetrimmer. Local regulations may restrict the age of the operator. 2. Only use the Hedgetrimmer in the manner and for the functions described in these instructions. 3. Never operate the Hedgetrimmer when you are tired, ill or under the influence of alcohol, drugs or medicine. 4. The operator or user is responsible for accidents or hazards occurring to other people or their property. Electrical 1.
3 CABLES 3. IMPORTANT! IMPORTANT • Use only 1.00mm2 size cable up to 30 metres length maximum. E Maximum rating : L 1.00mm2 size cable, 10 amps 250 volts AC. • THE EASI-TRIM IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO THE PRODUCT. 1. Flymo Mains Cables and Extension Cables are available from your local Electrolux Outdoor Products Approved Service Centre. 2. Do not wire an extension cable directly to your product yourself.
4 Preparation Instructions A Fitting the Cable Holder to Your Hedgetrimmer (A) and (B) 1. Insert T-shaped hooks of cable holder into Tshaped holes on the underside of your Hedgetrimmer. (See Fig. A) B 2. Secure by pulling the cable holder, in the direction shown, away from the Hedgetrimmer, blades until it locks into position. (See Fig. B) Starting and Stopping Before starting your Hedgetrimmer. 1.
5 How to Use H J How to Use your Hedgetrimmer 1. Inspect area to be cut before each use remove objects which can be thrown or become entangled in the cutting blades. 2. Always keep the Hedgetrimmer in front of your body. Hold handle firmly with both hands and stand in a secure and stable position. 3. Allow the cutting blades to reach full speed before entering the material to be cut. 4. Always work going away from people and solid objects such as walls, large stones, trees, vehicles etc. 5.
6 Caring for your Hedgetrimmer Lubricating the Cutting Blade For easier operation and longer life, lubricate the cutter blades before and after use. Apply the oil so that it runs between the two blades. See Pic L. At the end of the Cutting Season. 1. Clean your Hedgetrimmer thoroughly. 2. Check that all nuts and bolts are tight. 3. Visually inspect the Hedgetrimmer for any worn or damaged parts, contact your local Service Centre if any parts require replacement.
Service Recommendations 1. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. 2. Always use genuine Flymo Spare Parts. 3. Prepacked spares are available from most Electrolux Outdoor Products stockists. 4. Your product is uniquely identified by a silver and black product rating label 5.