ROLLER COMPACT 400/4000 ROLLER COMPACT 400 ROLLER COMPACT 4000 ION T A RM NFO I T N RTA use O P rence e e f IM r e o r bef ure Read in for fut a & ret For all customer enquiries or for replacement parts, contact:- ☎ 01325 300303 www.flymo.com eop.customer.services@electrolux.co.
Carton Contents ROLLER COMPACT 400 lower handle fixing pins grassbox lid washers bolts height adjsutment lever spanner/scraper lock-off button nuts handle knob deck cable clips instruction manual upper handle electric cable with moulded on plug lower handle ROLLER COMPACT 4000 Easi-Reel cable spool washers bolts lower handle fixing pins grassbox lid height adjsutment lever lock-off button spanner/scraper nuts handle knob deck cable clips instruction manual upper handle electric cable wi
General 1. Never allow children or people unfamiliar with these instructions to use the mower. Local regulations may restrict the age of the operator. 2. Only use the lawnmower in the manner and for the functions described in these instructions. 3. Never operate the lawnmower when you are tired, ill or under the influence of alcohol, drugs or medicine. 4. The operator or user is responsible for accidents or hazards occurring to other people or their property. Electrical 1.
Assembly Instructions B A C grassbox lid lower handle fixing pins handle knob D 1 bolt 2 washer Assembly of Lower Handles to Deck 1. Insert lower handle into holes in the deck (A). 2. Release the grassbox catch and lift the grassbox lid (B). 3. Rest the grassbox lid against the lower handle and remove the grassbox. 4. Push the lower handle into place ensuring that the holes in the lower handle are correctly located behind the holes in the deck. 5.
Removing, Emptying and Refitting the Grassbox F grassbox empty Grassbox Full • As the grassbox fills up, grass will be visible through the window in the lid (F). • When the window is full it is time to empty the grassbox. grassbox full G Emptying the Grassbox • Stop the lawnmower, as described in ‘To Stop your Lawnmower’ and wait until the blade has stopped rotating, BEFORE lifting the grassbox lid. 1. Release grassbox catch and lift grassbox lid (B). See Assembly Instructions. 2.
Starting and Stopping L K M N P 1 • Important:- Your lawnmower will not start until the grassbox lid is firmly closed and clicked into place. To Start your Lawnmower 1. Connect female extension cable connector to the back of the switchbox. (K) 2. Form loop in mains cable and push the loop through the slot as illustrated in picture (L) 3. To secure, position loop over the hook and pull the cable back through the slot as illustrated in picture (M). 4. Connect plug to mains and switch on. 5.
Removing and Fitting the Blade and Fan (Q) Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Removing the Blade and Fan 1. To remove the blade bolt, hold the fan firmly and, with the spanner provided, loosen the blade bolt by turning it anti-clockwise. 2. Remove the blade bolt, blade and fan from the pulley. 3. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition.
Caring for your Lawmower S Cleaning (S) • USE GLOVES • IMPORTANT: It is very important that you keep your lawnmower clean. Grass clippings left in any of the air intakes or under the deck could become a potential fire hazard. • IMPORTANT Never use water for cleaning your lawnmower. Do not clean with chemicals, including petrol, or solvents - some can destroy critical plastic parts. 1. Remove grass from under the deck with the spanne/scraper tool 2.
Fault Finding Hints Fails to Operate 1. Is the correct Starting procedure being followed? See ‘To Start your Lawnmower’. 2. Is the grassbox lid firmly closed? 3. Is the Power Turned On? 4. Check the fuse in the plug, if blown replace. 5. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local approved Electrolux Outdoor Products Service Centre. Poor Grass Collection 1. Disconnect from the mains electricity supply. 2.
Environmental Information Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life. • Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.