Check accessories Standard List of Accessories: When you open the product packaing,please check whether the objects in it are consistent with the main body and accessories you purchased.If there is any inconsistency,please contact our company or our distributor.
Step1 Faucet installation Step2 Checking and testing Apply teflon tap to the shower arm2,put flange 1 and connect it to water supply pipe,after fixing the shower arm,screw the shower head to the shower arm.ATTENTION:don′t forget the o-ring between the shower arm 2 and the showe head 3 Put the trim plate 4 ,fix the handle 8 with screw 6 ,finally put the index 7 . Check all connections at arrows for leaks, re-tighten it if necessary.
Step3 Maintenance Hexagon spoon fastening 6.7" 170mm 1/2NPT If faucet leaks from the handle or drips from spout,please replace cartridge following the following steps: 6.1″ 155mm 2.3″-2.5″ 6.