Instructions / Assembly

Table Of Contents

INSTALLATION INSTRUCTIONS

BEFORE INSTALLATION

DESCRIPTION

· Solid brass construction

· Premium finish resist corrosion and tarnishing

· Feature a waterfall spout

· Hand shower with back flow protection

· 60"(1500mm)rubber hose included

· Feature a pressure balance valve

· Suitable for wall mounted rough-in installation

FLOW

· Faucet maximum 4 gpm @ 60 psi

· Hand shower maximum 2 gpm (7.6L/min)

WARRANTY

· Lifetime limited warranty against leaks, drips and finish

· defects from the original date of purchase. (Improper

care and cleaning will void the warranty)

· 3months warranty if used in commercial installations

Specifications

PAGE 1
INSTALLATION INSTRUCTIONS BEFORE INSTALLATION Specifications DESCRIPTION · Solid brass construction · Premium finish resist corrosion and tarnishing · Feature a waterfall spout · Hand shower with back flow protection · 60"(1500mm)rubber hose included · Feature a pressure balance valve · Suitable for wall mounted rough-in installation FLOW · Faucet maximum 4 gpm @ 60 psi · Hand shower maximum 2 gpm (7.
PAGE 2
BEFORE INSTALLATION INSTALLATION STEPS 1.Check the package and confirm all parts are included. If any part is missing or damaged, please contact us. 2.Do not disassemble the main body, as it has been installed & commissioned correctly & precisely before leaving the factory. 3.Shut off the main water supply prior to beginning installation. 4.Do flush the water supply lines to remove any dirt and debris before installation (IMPORTANT). 5.Make sure to connect the hot / cold inlet pipe correctly.